Last post on Feb 13, 2013 at 7:44 PM
You are in the Pontiac Bonneville
What is this discussion about?
Pontiac Bonneville, Heating / Cooling, Sedan
#210 of 231 A/C Vent problem 2003 Bonneville
Mar 27, 2012 (5:51 am)
Trying to figure out what could possibly be wrong with my wifes car. When the A/C is on the cool air blows out from the floor vents just fine ( I think ). When you push the button to go to the vents on the dash board, the air coming out of the vents on the passenger side comes out cool but on the driver side there is a noticeable (hotter) difference. Does anyone have any idea what could be causing this. I thought it might be the blend door actuator, but the air itself is being diverted correctly, the only problem is the temperature of the air on the drivers side vents on the dash when it is on A/C. Any help that anyone can provide will help out immeasurably.
#211 of 231 Re: A/C Vent problem 2003 Bonneville [sea_lifer]
Mar 27, 2012 (7:21 am)
You are dealing with three separate electric actuators.
One controls the direction of airflow for both systems, driver and passenger sides. That is not a problem since you can change the air flow path which is the same for both sides.
One controls the air temperature blend door on the driver side.
One controls the air temperature blend door for the passenger side.
By removing the underdash plastic cover carefully, you can then watch the movement of each of these by the white center rotor on the electric actuator while you change the temperature demand on the dash with the key ON (I don't think the engine has to be running).
I suspect you'll find the driver side is not moving all the way through the range of motion.
#212 of 231 Blower motor on a 96 bonneville
Mar 30, 2012 (6:53 pm)
First thank you for all the great information.. I lost my highest fan speed and I looked at the illustration above but I cant tell if I replace the fan motor from under the hood or under the dash, can you please point me in the right direction on what I need to do Thanks WM
#213 of 231 Re: Blower motor on a 96 bonneville [wolfman2020]
Mar 31, 2012 (3:56 am)
Why would you replace the blower motor? If it runs on the 3 lower speeds, that means the fan motor is okay.
Notice there is a separate circuit for the highest speed due to the high current draw. IIRC it has its own fuse in the relay center under the hood. AND it has its own relay. Either of those may have failed. The relay is in the relay center under the hood.
If you are able to do some electric troubleshooting, test for power on the purple line to the blower motor when the fan switch is on HIGH and the key is ON. You probably are getting 12 volts on the other 3 speeds and then when you switch to HIGH, the voltage drops to zero.
The cover for the relay center comes off easily. I do not know if there is a diagram in it showing which large fuse goes to which circuit. You may have to test each of them for 12 volts on both poles.
#214 of 231 Re: Blower motor on a 96 bonneville [imidazol97]
Mar 31, 2012 (5:34 pm)
Thanks for the help I can definately do a voltage test to the blower motor,,Is the motor under the dash or under the hood? Or should I just check it at switch?? Thanks again WM
#215 of 231 Re: Blower motor on a 96 bonneville [wolfman2020]
Apr 01, 2012 (7:23 am)
Blower motor is on the firewall center behind the engine. It has a round cover with 5-7 screws holding it in. Follow the leads from the motor up to the top of the air passage that carries the air from the blwoer motor.
#216 of 231 Re: Blower motor on a 96 bonneville [imidazol97]
Apr 04, 2012 (8:00 am)
Thank you again it was the fuse and its working. Now Im having trouble with the engine shutting off intermitent. I think it may be the ignition switch because I can wiggle it and it will come back on. How does the switch come out, do I have to pull the steering wheel or is there an easy way to change it,,thank you again . I'm a motorcycle mechanic and working on cars tends to make me crazy
#217 of 231 Re: Blower motor on a 96 bonneville [wolfman2020]
Apr 04, 2012 (8:30 am)
The ignition switch itself is on the top of the steering column under the dash. It's linked to the lock cylinder at the top by some kind of rod. Many people think it's up at the top with the lock cylinder.
Several H-body posters have had problems with the switch. Check rockauto.com for it and look for a 5% discount code that goes into the "where did you hear about us" box.
To replace must not be terribly difficult from what folks in Pontiac forums have said. That's as long as you can get your body in there between the door frame and the seat or lie upside down on the seat and hang over down onto the floor. I worked under there on the diaphragms for the HVAC control valves, but I didn't check on how the ignition switch looked.
I suspect you need to disable the air bags to do this.
#218 of 231 Heat is constantly on
May 26, 2012 (1:36 pm)
I have a 96 Bonneville and got the a/c fixed a few summers ago and then it went out again the next summer. I donít want to dump a ton of money into it but it allows heat in on the floor board all the time. When i turn the blower on i can switch between floor, vent, and defrost, but when everything is off heat pores in from the floor board making summers miserable. What can i do so that when the unit is off no air comes through any port?
#219 of 231 Heat flows through vents
May 26, 2012 (5:56 pm)
I have a 96 Bonneville and got the a/c fixed a few summers ago and then it went out again the next summer. I donít want to dump a ton of money into it but it allows heat in thru all vents, floorboard vent, and defrost at all times. When i turn the blower on i can switch between floor, vent, and defrost, but when everything is off heat continues to flow in thru all vents though the blower is off. Please help!!!