Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Chevrolet Colorado and GMC Canyon Chevy Colorado and GMC Canyon Electrical Problems
250 messages, Last post on Dec 05, 2009 at 9:32 PM
You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram
|
Replying to: leadfoot4 (Sep 22, 2008 11:00 am) I'm not positive but I think those relays that you are talking about might be in the switch assembly in the door panel on the Colorado. I'll remove the switch assembly tonight and disassemble it to see. I'll post my finding here. Cheers.
|
|
|
Replying to: mrwebman (Sep 22, 2008 12:31 pm) http://forums.corvetteforum.com/show....php?t=1606865
|
|
|
Replying to: leadfoot4 (Sep 22, 2008 3:26 pm) We allow a link like this as long as it's viewable to all and directly answers someone's question. If it's just to promote another site, no good. kcram - Pickups Host
|
|
|
Replying to: leadfoot4 (Sep 22, 2008 3:26 pm) I pulled the connectors loose on the BCM hoping that it might 'reset' it but it had no effect. I sure hate to take it to the dealer but I can't afford to just change out expensive parts on a whim and I can't find a decent schematic. I tell you why the truck costs so much - there's $15,000 in wire in the thing. When you start looking behind covers and things it's amazing how much wire and how many connectors there are! Cheers |
|
|
Replying to: robl6210 (Sep 22, 2008 11:16 am) 
|
|
|
Replying to: kcram (Sep 22, 2008 4:32 pm) It could have been helpful.....
|
|
|
Replying to: leadfoot4 (Sep 23, 2008 6:24 am) For anyone that is having a problem where both your door lock button as well as your key fob doesn't work then I'd look at the relay as a probable problem. The relays on the Colorado are smaller than the ones on the Vette but they are replaceable. Unfortunately, my problem was that only the key fobs wouldn't unlock the door... the switch still worked which means the relays are good. When I figure my problem out I'll announce it here. Cheers.
|
|
|
Replying to: mrwebman (Sep 23, 2008 6:52 am) To the best of my knowledge, you turn the key to the "on" position, then hold the lock and unlock buttons on the fob simultaneously for a few seconds, or something like that. |
|
|
Replying to: dmathews3 (Sep 22, 2008 5:17 pm)
|
|
|
Replying to: robl6210 (Sep 23, 2008 10:59 am)
|
|
You are here:
Forums
Pickups Chevrolet Colorado and GMC Canyon Chevy Colorado and GMC Canyon Electrical Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Colorado
2010 GMC Canyon
Browse by Board
Browse by Topic
Today's Chats
