You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Electrical Problems

248 messages, Last post on Nov 17, 2009 at 4:12 PM
You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram
I am reliably informed that the Alternator only puts out about 50% of the rated amps at idle. So all my plugged in kit is 86ing the batteries. This is progress, so when I figure out why I'm getting low rpms at idle (AIC sensor or vacuum leak) and get that fixed ... I can then get a High Output Alternator installed.
|
|
Has any one had a problem with there doors locking and un locking while driveing had that happen now it dings all time, and started to not lock by switch or by the fob any ideas.
|
|
|
Replying to: steve515 (Mar 13, 2009 9:17 am) |
|
| Ok so here goes doors will not lock or dislock, drivers window will not go down I see on here where other have had same type problem, disconected batt let sit for a while re-conected and still same, took armrest apart cleand and made sure dry still same issue, any ideas and could not find a ground problem however still checking on that, I hear you talk about the BCM where is that located,could that be it, man do I miss the days when you could actually work on your own auto, thanks all. | |
|
Replying to: steve515 (Mar 14, 2009 4:53 pm) |
|
|
Replying to: steve515 (Mar 14, 2009 4:53 pm) |
|
|
Replying to: steve515 (Mar 14, 2009 4:53 pm)
|
|
|
Replying to: woody106 (Oct 23, 2008 12:47 pm) |
|
|
Replying to: flacondo (Mar 16, 2009 6:40 am) |
|
|
hey everyone, I recently found this site, i have a 2004 colorado, ext cab 2wd with 78,000 miles.., about 4months ago, i went to a friends house and the truck ran fine, when i started to leave it would just turn over and kinda shake a little bit i tried for 10 mins and nothing it would just spin over. Well the next day i went up with a mechanic and he told me to try it and wouldnt ya know it fired right up and ran fine. well i thought it was just a fluke because it ran great until yesterday it did the exact same thing again, i let it sit over nite and it started fine, i just dont want to get stuck somewhere and my dealer said they could only fix the problem if it was doing it when i brought it in, this is kinda stupid cause to bring it in i have to start the thing.. lol , any help would be appreciated. TBunch |
|
You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Electrical Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Colorado
2010 GMC Canyon



Browse by Board
Browse by Topic
Today's Chats