Sign In Join 



Chevy Colorado and GMC Canyon Electrical Problems

249 messages,  Last post on Nov 24, 2009 at 4:21 AM

You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram

What is this discussion about? Chevrolet Colorado, GMC Canyon, Electrical, Truck


Messages Page 20 of 25
1
...
17
18
19
20
21
22
23
...
25
Prev
Next
Last
Go To Msg #
Search This Discussion

#190 of 249
Re: 2005 GMC Canyon Engine Misfire / Electrical [kleinbones] by garythecarguy
Mar 05, 2009 (4:34 pm)
Reply

Replying to: kleinbones (May 05, 2008 1:00 pm)

go to denlorstools.com and check the camshaft solenoid feature.my neigbors truck is doing the same thing and we're checking it out this weekend,hope thats it.
#191 of 249
Aaargh, frikken Colorado! by Alennx
Mar 08, 2009 (9:25 pm)
Reply
I am reliably informed that the Alternator only puts out about 50% of the rated amps at idle. So all my plugged in kit is 86ing the batteries. This is progress, so when I figure out why I'm getting low rpms at idle (AIC sensor or vacuum leak) and get that fixed ... I can then get a High Output Alternator installed.
#192 of 249
lock problems 2005 colorado by steve515
Mar 13, 2009 (9:17 am)
Reply
Has any one had a problem with there doors locking and un locking while driveing had that happen now it dings all time, and started to not lock by switch or by the fob any ideas.
#193 of 249
Re: lock problems 2005 colorado [steve515] by dmathews3
Mar 13, 2009 (10:54 am)
Reply

Replying to: steve515 (Mar 13, 2009 9:17 am)

Sounds like a short. We had it happen on a 3 day old Caddy STS back in 99. The door locks kept locking/unlocking while the seat started moving forward. Luckly we were in a Mall parking lot at the time and was able to stop and turn off the car. Had it towed to dealer where he found a short in the main wire harness. Fixed it and never had the problem again in 4 yers of ownership. Also turned out to be the only problem we ever had with the car even though we were worried for a while having such a major problem on a brand new 3 day old car.
#194 of 249
chevy colorado door locks by steve515
Mar 14, 2009 (4:53 pm)
Reply
Ok so here goes doors will not lock or dislock, drivers window will not go down I see on here where other have had same type problem, disconected batt let sit for a while re-conected and still same, took armrest apart cleand and made sure dry still same issue, any ideas and could not find a ground problem however still checking on that, I hear you talk about the BCM where is that located,could that be it, man do I miss the days when you could actually work on your own auto, thanks all.
#195 of 249
Re: chevy colorado door locks [steve515] by ECR223
Mar 14, 2009 (7:50 pm)
Reply

Replying to: steve515 (Mar 14, 2009 4:53 pm)

Look back at message #154 from HopeGMC... He explains how to fix it yourself. It did work for me... For a little while, but then it crapped out again...FINALLY took it to dealer, and they said "bad window switch"... It WAS covered under my extended warranty, but they had to order the part.... Drove home from dealer and it didn't work, but when I got in it 3-4 hrs later, everything worked again... So they better still replace it, and I'll let everyone know if it stays working....
#196 of 249
Re: chevy colorado door locks [steve515] by HopeGMC
Mar 16, 2009 (4:37 am)
Reply

Replying to: steve515 (Mar 14, 2009 4:53 pm)

The BCM is located in the passangers front kick panel. If there is now water damage noticed, I would still check the drivers window/door lock control panel. Mine was a 2004 model.
#197 of 249
Re: chevy colorado door locks [steve515] by flacondo
Mar 16, 2009 (6:40 am)
Reply

Replying to: steve515 (Mar 14, 2009 4:53 pm)

I posted this same problem, last year. I also tried all the "tricks" mentioned in this forum, with no luck. Changed out the driver's door lock/window switch and that solved the problem. My truck was not under warranty, so it was expensive to buy, but easy to install. It's very obvious that GM had a major problem with this switch, but they will never admit it. Heck, they have enough other problems to worry about......lol
#198 of 249
Re: 2008 GMC Canyon Windshield Wipers [woody106] by bully76
Mar 17, 2009 (7:10 am)
Reply

Replying to: woody106 (Oct 23, 2008 12:47 pm)

My 08 did this as well...the body control module had to be reprogrammed. This is a known issue and there is a TSB in regards to this called Phanton Wiper issue
#199 of 249
Re: chevy colorado door locks [flacondo] by ECR223
Mar 17, 2009 (12:12 pm)
Reply

Replying to: flacondo (Mar 16, 2009 6:40 am)

Yeah, they said my switch had a short, so that's why it worked intermittently. So hopefully the problem will now be over. I think the receipt said the switch was about $300 or so. Don't have it in front of me at the moment though, so don't quote me on that....

Messages Page 20 of 25
1
...
17
18
19
20
21
22
23
...
25
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement