You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Electrical Problems

249 messages, Last post on Nov 24, 2009 at 4:21 AM
You are in the Chevrolet Colorado and GMC Canyon Forum. Your Host is kcram
| Dont have a fax will try to get one. | |
|
Replying to: HopeGMC (Feb 04, 2009 11:34 am) Well thanks to HopeGMC it's working again. I took it apart and looked at everything and things looked OK so I tapped the relay and put everything back togather and wow it worked. A GMC/ Chevy repair...... My hats off to HopeGMC thanks alot. What is the BCM and TSB. Just for reference I might need later. Thanks again...
|
|
|
Replying to: zipyz28 (Feb 07, 2009 5:52 pm) BCM and TSB are acronyms for "body control module" amd "technical service bulletin".
|
|
|
Replying to: leadfoot4 (Feb 08, 2009 5:36 am)
|
|
|
Replying to: zipyz28 (Feb 08, 2009 5:32 pm) The power to all of these systems comes from the battery and charging system, via the fuse box (for protection). Sometimes I long for the simpler days of "points and condensors"......
|
|
|
Replying to: leadfoot4 (Feb 09, 2009 4:45 am) |
|
|
Replying to: HopeGMC (Feb 04, 2009 11:34 am) |
|
|
Replying to: HopeGMC (Feb 04, 2009 11:34 am) I'm having just the door lock problem (no window problems at all) where my doors will not unlock with the key fob but they will lock with it and the doors lock and unlock normally from inside of the vehicle. The key fob is good because the lights flash when I unlock the doors with the fob but it just doesn't trip the unlock mechanism. Also, if I do not unlock with the fob first, the alarm sounds when I use the key to open the door. Oh, and one other thing that I noticed is that when I remove the key from the ignition, it doesn't unlock the doors. I could have sworn that it used to do that. Anyhow, if you have a schematic of the system I would love to get a copy from you. I have the wiring diagram from a car maintenance book but it does not have a schematic... just a wire going in and a wire going out, etc. Other than this one problem, the truck has been real good. It's excellent on gas and has plenty of get up and go. Thanks for any help. Cheers. |
|
|
|
I have a 2006 gmc canyon with a 2.8L. It just now hit 30000 miles. i have had no problems until now and for some reason my brake lights won't light up. The funny thing is that my third brake light works fine. I have replaced the bulbs, checked all the fuses, and have even traced the wiring as far as i can see it but cant seem to find the problem. I contacted the dealer and got the usual BS ($80 per hour) has anyone had the same problem or have any suggestions on what to do.
|
|
|
Replying to: diddysmash (Feb 12, 2009 7:05 pm) |
|
You are here:
Forums
Pickups
Chevrolet Colorado and GMC Canyon
Chevy Colorado and GMC Canyon Electrical Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Colorado
2010 GMC Canyon



Browse by Board
Browse by Topic
Today's Chats