59 messages,
Last post on Mar 13, 2010 at 11:14 AM
You are in the
Dodge Ram-2010 and older Forum.
What is this discussion about?
Dodge Ram Pickup 1500, Suspension, Truck
#52 of 59 Re: Noise in the rear End [jfrazier23]
by phillreco
Mar 17, 2009 (1:19 pm)
i too have 97 ram. that roarin sound got worse till i had to get another rear end. the new one makes noise too, when you put on brakes or turn abbruptly. i'm trying to find a good complete rear end with 4to 1 gears my old one and the i pu in have 350 gears does any one know where i can get a 4 to 1 gear complete. it don't have to be new.
#53 of 59 Re: Dodge 2500 venting differential fluid [bharvey1]
by gearbox_paul
May 01, 2009 (10:50 pm)
My 2500 does exactly the same thing. Did you ever figure this problem out ???
#54 of 59 2008 dodge ram sits higher on one side
by junglejim64
Nov 24, 2009 (12:45 pm)
#55 of 59 2008 dodge ram sits higher on one side
by junglejim64
Nov 24, 2009 (12:45 pm)
i have a 2008 dodge ram 1500, regular cab,short bed 2wd. it sits higher on the drivers side. i was told by one dealer that dodge did this at the factory on the regular cabs. anybody ever heard of this? how do i fix it? any help would be appreciated .
#56 of 59 my new 09 1500 crew cab pkup higher too
by houjon
Jan 27, 2010 (7:41 pm)
My 2009 crew cab has fallen 1/2 inch, it is noticble even to the dealer, who says it is within specifications and only bring it back if it drops down to 3/4 of an inch. Is it a bad coil, shock or compression joint? or other?
#57 of 59 Re: my new 09 1500 crew cab pkup higher too [houjon]
by canddmeyer
Feb 04, 2010 (1:50 am)
My 2009 1500 CC is a 1/2" high on the passenger side, but once I get a passenger it evens out. Many have noticed, but no one has said it causes any issues.
#58 of 59 Leveling Kits????????????????
by nt_train
Mar 03, 2010 (4:52 pm)
2010 dodge ram 1500 4x4 quad cab big horn package. I want to buy a Daystar Leveling kit which lifts front end up to 3" What do y'all recommend? Thanks!!
#59 of 59 Traction Bars for 2007 Dodge Ram 1500 Sport
by bslayton
Mar 13, 2010 (11:14 am)
I want to install Traction Bars on my 2007 Ram 1500 Sport can anyone tell me the Part Number for them from Lakewood. I ordered a set from JC Whitney and like the dummy I am I beleived the girl at JC Whitney that the bars I was ordering will fit my Ram even after I told her my axel was under the leaf springs. the part number is 22026 and the do not fit my ram, now I have to go through the hassle of returning them.