You are here: Forums Sedans Ford Fusion/Mercury Milan Ford Fusion/Mercury Milan Maintenance & Repair

Ford Fusion/Mercury Milan Maintenance & Repair

67 messages,  Last post on Aug 17, 2009 at 11:44 PM

You are in the Ford Fusion/Mercury Milan Forum. Your Hosts are pat & karens

What is this discussion about? Ford Fusion, Mercury Milan, Auto Repair, Sedan

Messages Page 2 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

#8 of 67 Re: I-4 Filter [depalma] by akirby Apr 18, 2007 (9:25 am)
Replying to: depalma (Apr 18, 2007 8:38 am) Yes.   According to the OM it could be either one. I know that some come with the cartridge filter as it's been the subject of other debates. Not sure if some also come with the regular type or if it's just in the OM as a future possibility.
#9 of 67 Re: Ford Fusion/Mercury Milan Problems and Solutions [07milan] by tiredofpop May 14, 2007 (11:56 am)
Replying to: 07milan (Apr 12, 2007 7:47 pm) My 2007 Milan does the same. I've had a speaker replaced, a brake piece replaced and now the factory is saying no more replacement pieces until Ford figures it out. It's very annoying, and very disappointing considering it's a brand new car. Love everything else about it, but this is frustrating! Come on Ford, figure it out!
#10 of 67 Popping Problem Fixed by 07milan May 31, 2007 (2:18 pm)
My Sonoma Ca. dealer fixed the popping problem yesterday. I believe a factory TSP has just been issued. I'm not real sure what was done, but it sounded like a wire or connection had some extra insulation put around it.
#11 of 67 "Door Ajar" Message on Fusion by kmaurer Jun 03, 2007 (1:39 pm)
I have 3,000 miles on my Fusion. Lately, with things starting to get warmer in my part of the country, the car will occasionally say "Driver Door Ajar" when the driver's side door is shut tightly. My question is: where is the sensor that tells the car the door's shut? All I can guess is that it is located in the door latch. Since it is happening intermittently, I can't take it into the dealership until it is actually doing it. I first want to see if anything is "stuck" and just needs to be lubricated. Replies to this message: akirby (Jun 03, 2007 6:44 pm) scape2 (Jun 07, 2007 7:58 pm)
#12 of 67 Re: "Door Ajar" Message on Fusion [kmaurer] by akirby Jun 03, 2007 (6:44 pm)
Replying to: kmaurer (Jun 03, 2007 1:39 pm) It's in the door latch. Spray it with WD-40 and see if that fixes it. Replies to this message: scape2 (Jun 07, 2007 7:58 pm)
#13 of 67 Re: "Door Ajar" Message on Fusion [akirby] by scape2 Jun 07, 2007 (7:58 pm)
Replying to: akirby (Jun 03, 2007 6:44 pm) Actually a silicon based lubricant would be better...
#14 of 67 License plate lights by cldfuzn25 Jun 11, 2007 (11:31 am)
Is anyone noticing that the lights that are lighting up the back license plate getting very hot? I noticed what looked like to very evenly spaced dents back by there and was confused by how they got there till i took some stuff out of the trunk last night and the back was very very hot by the lights and kinda thought maybe my car was melting there... has anyone noticed that? Replies to this message: ajever1 (Sep 06, 2007 8:50 am) cldfuzn25 (Sep 06, 2007 8:55 am) keithm1 (Sep 07, 2007 12:29 pm)
#15 of 67 External Temperature Question by tommyshoegirl Jun 15, 2007 (12:13 pm)
I own a 2006 SEL. Has anyone had any problems with the external temperature reading 20 degrees too high when the car is started? It takes anywhere from 5 to 10 minutes to get to the correct outside temp. My dealer is telling me there isn't anything wrong with my car, am I crazy? Replies to this message: akirby (Jun 15, 2007 4:07 pm) scape2 (Sep 24, 2007 4:55 pm)
#16 of 67 Re: External Temperature Question [tommyshoegirl] by akirby Jun 15, 2007 (4:07 pm)
Replying to: tommyshoegirl (Jun 15, 2007 12:13 pm) Yes, that's normal. The sensor is near the front grille and can get very hot in the sun or with a hot engine. Apparently the external temp software doesn't have the same logic that the Lincoln LS used. It would ignore the temp sensor until the vehicle was moving and the sensor had time to adjust to the ambient air temp. They just don't have the software in the Fusion to do the same thing.
#17 of 67 Milan plate lights by keithm1 Jul 06, 2007 (4:21 pm)
I noticed one of the license plate lights go out. Upon replacing(it was not burned out)I noticed the terminal? had corroded. Anyone else have this issue? It will be fixed under warranty.

Messages Page 2 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Ford Fusion/Mercury Milan Ford Fusion/Mercury Milan Maintenance & Repair