You are here:
Forums
Sedans
Ford Fusion/Mercury Milan
Ford Fusion/Mercury Milan Maintenance & Repair

67 messages, Last post on Aug 17, 2009 at 11:44 PM
You are in the Ford Fusion/Mercury Milan Forum. Your Hosts are pat & karens
I have been having issues shifting my car (which is a manual trans) into reverse. It locks and then i have to roll my car forward or backwards (thats if i am lucky and on a incline of sort) just to get it to slide into gear. The gears are very notchy, and sometimes very hard to get into gear.. i have driven stick shifts all my life and i have never come across this. I took it to the dealer and all they did was lube it up... which didnt help... they said they cant find the problem... any suggestions?
|
|
|
While backing up, a tree branch caught the antenna and snapped it off. The mast is OK. What broke is a small nut that the mast screws into. One side is threaded for the mast and the other has a screw thread that goes into another fitting. The break is at the top of the threads on the middle fitting. Anyone know how to disassemble the black plastic mount on the roof to get at the rest of the parts, or any advice on how to proceed? |
|
I have a new 07 Milan Premier V6 AWD and have been familiarizing myself with the maintenance schedule, but I cannot find anything in the maintenance schedule pertaining to the AWD system. If this car is based on the Mazda6, then does it have the same AWD system as the Escape/Mariner/Tribute and should the same maintenance schedule be followed?
|
|
|
Replying to: cldfuzn25 (Aug 07, 2007 3:40 pm) All of those cars occasionally required me to put the car in first then let up on the clutch a smidgen before they would shift into reverse. The Mustang requires this the least and I think it has something to do with the design of the trans and the synchros. And if you are observant, you will have noticed that all the cars I listed but for the Mustang had Mazda designed Manual Trans. So it might just be a Mazda thing. Mark. |
|
|
Replying to: cldfuzn25 (Jun 11, 2007 11:31 am)
|
|
|
Replying to: ajever1 (Sep 06, 2007 8:50 am) |
|
|
Replying to: ajever1 (Sep 06, 2007 8:50 am) |
|
|
Replying to: tommyshoegirl (Jun 15, 2007 12:13 pm) |
|
|
|
I have lost a couple items that slipped between the cover of the center console/cup holder while it was closed then opened; does anyone know how to get inside the center console?
|
|
|
Has anyone answered #26? I have lost my cell phone that slipped between the cover of the center console/cup holder while it was closed then opened; how do you dismantle the center console to get inside? |
|
You are here:
Forums
Sedans
Ford Fusion/Mercury Milan
Ford Fusion/Mercury Milan Maintenance & Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Ford Fusion
2010 Mercury Milan



Browse by Board
Browse by Topic
Today's Chats