Last post on Mar 07, 2013 at 11:24 PM
You are in the Ford Fusion/Mercury Milan
What is this discussion about?
Ford Fusion, Mercury Milan, Auto Repair, Sedan
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#115 of 143 Re: Ford Fusion 2010 A piece of crap [triman666]
Dec 26, 2011 (8:43 am)
A loaner for you. That's nice of dealer to do.
But, I feel that some times when his (dealer) 'technicians' touch my vehicle they can screw up something else. At least that's the way it worked at Toyota...and others.
So while you are out there enjoying the 'free' loaner there is some monkey in the garage working on your own...and making it worse. It's not just Ford, it happens with all of them
#116 of 143 What's the recall about?
Dec 26, 2011 (8:44 am)
#117 of 143 Re: Ford Fusion 2010 A piece of crap [wilcox]
Dec 26, 2011 (3:12 pm)
I understand the dealer had my car torn apart and actually told me his guys had never done this particular job before and this was "A learning curve for them" I can't wait to see if blows up in the next couple of weeks. If I have another problem with it I will dump it
#118 of 143 Re: Coarse engine noise [bbear]
Feb 05, 2012 (8:34 pm)
I'm having a similar problem with my 2011 Fusion, 4 cyl ., 33k miles .
Did you find out the cause of your problem ? Thanks for any info you
might be able to provide.
#119 of 143 2010 Fusion recall for 17" steelies stud failure
Feb 10, 2012 (2:50 pm)
About 6 weeks ago it was reported that 2010 and 2011 Fusions and Milans with 17" steel wheels were to be recalled because some of the lug studs were shearing off. Two cars lost wheels (at low speed) and something like 28 other cars has some sheared studs. The recall was supposed to occur on January 28th. I have not been notified. Does anyone have information on the state of this recall?
#120 of 143 Re: 2010 Fusion recall for 17" steelies stud failure [pod]
Feb 10, 2012 (3:05 pm)
We were notified about a month ago & our '10 Fusion had it's studs replaced today. This recall also involves brake rotors. We had our original rotors replaced by our independent mechanic earlier because they were warped and our Ford dealer told us that Ford will reimburse us for our expense. That phone call is on my "to do" list.
#121 of 143 steel wheel recall details
Feb 21, 2012 (6:57 pm)
I enclose a quote from inside-line re the recall. I have not been notified and will have to check the date of manufacture of my 2010 Milan I-4 with steel 17" wheels (which have plastic covers to make them look like alloy).
"Ford is recalling 128,616 2010-'11 Ford Fusions and Mercury Milans equipped with 17-inch steel wheels because of a risk of wheel separation, according to the National Highway Traffic Safety Administration.
"The wheel studs may fracture, potentially causing a wheel to separate," said NHTSA in its recalls summary of the problem. "While driving, multiple stud fractures could occur at the wheel location, and the operator may experience vehicle vibration and/or wheel separation, increasing the risk of a crash."
Ford Fusions and Mercury Milans equipped with alloy wheels are not affected.
The recall also includes 2,940 service steel wheels sold to dealers.
Ford said as of September 30, it was aware of one front wheel separation and five rear wheel separations, according to documents filed with the federal government.
The affected vehicles were built from April 1, 2009 through April 30, 2009 and from December 1, 2009 through November 13, 2010.
Ford dealers will inspect the rear brake disc surface for flatness and replace the discs. In addition, the wheel lug nuts will be replaced on all four wheels. The recall is expected to begin on January 24. Owners can contact Ford at 1-866-436-7332."
That is an excerpt from an inside line story maybe two months ago.
#122 of 143 Nonlinear fuel gauge
Apr 26, 2012 (5:26 pm)
I am curious why automobile engineers have not been able to provide a more linear fuel gauge. My experience in every car I have ever owned (including my present Milan 2010 I4) is obviously nonlinear. The mileage when the needle reads half full cannot be doubled to predict the mileage per tank. The mileage per tankful is markedly less than 2 x the half way value. It seems that the closer you get to the "E" marker the more quickly the needle drops. I think I understand why this happens if there is a float and the tank is narrower at the bottom but why haven't the same engineers who give blind-side warnings and lane crossing warnings figure out a way to electronically adjust for the shape of the tank. Or is there some other reason that I am missing?
#123 of 143 trailer hitch to fusion/milan
Jun 07, 2012 (1:46 pm)
Occasionally I need more space to carry a large item, or one I don't want to put in the trunk. I am considering purchasing a small utility trailer with a 500# capacity and using that hitched to my 2010 Milan I4. The items would weigh only 200-350 pounds max so the added weight isn't an issue. These would be short trips at moderate speeds. My question is whether the plastic skirt and rear bumper enclosure makes installation of a standard trailer hitch difficult without making a cut out on the bumper enclosure which I would prefer not to do. I know some hitches have a bend in them and then come back up to the ball hitch. Does anyone have experience with putting a hitch on a fusion/milan? Any advice or product endorsements? Thanks.
#124 of 143 help with self dimming mirror knowledge
Sep 16, 2012 (1:53 pm)
I have a 2010 Milan with the electrochromo-whatever, self dimming mirror. I'm not sure it works. When I cover the two sensors at the base of the mirror if a set of lights behind me is very bright, no change. I would expect it to get brighter. I shone a small flashlight into it the other night while driving, no apparent change. On the other hand headlights in the rear view mirror do seem less intense than in the side mirrors.
Does anyone know how long it takes for the mirror to change reflectance after a bright light appears. It may be designed to have a relatively long response time to avoid short cycling with every reflection.
One very unusual idea which I read in one of these forums is to rotate the mirror 180 degrees. This is done easily and puts the light sensors at the top of the mirror and the microphone at the bottom. I wonder which is the intended way. The side taper seems more correct in the microphone up sensors down position.
Does anyone have a recommendation as to how I could test the mirror to see if it is working as intended. I hate bright headlights. Recently Audi brightened thier taillights to a nuclear level which is a new problem: they are too bright to begin with but when the brakes come on they are blinding. What is this trend to get brighter and brighter lights? The national highway safety did a research project and concluded that highways are so well lit these days that headlight intensity could be reduced 40% with no issues (and this was before the HID, LED nuclear intensity fad appeared). I actually wear lightly tinted sunglasses when driving at night to reduce some of the retina-searing moments.