Last post on Nov 25, 2007 at 7:29 PM
You are in the GMC Jimmy
What is this discussion about?
GMC S-15 Jimmy, SUV
#1 of 5 JIMMY s15 clutch issues HELP
Mar 06, 2007 (11:24 am)
I just got a new clutch on my 1990 s15 gmc jimmy 2 door 4.3L and it releases at the very top now after a month. also it chatters/ shakes reallllly bad! any info you have to help me will b awesome!
#2 of 5 Re: JIMMY s15 clutch issues HELP [r0th77]
Mar 06, 2007 (2:01 pm)
Adjust the pedal to release at the correct pedal level. Either a clutch slave cylinder adjustment or manual linkage. This assumes they put a new pressure plate, friction disc, throwout bearing, and surfaced the flywheel.
#3 of 5 Re: JIMMY s15 clutch issues HELP [repairdog]
Mar 06, 2007 (8:37 pm)
they sed that they can't adjust a hydrolic clutch
#4 of 5 Re: JIMMY s15 clutch issues HELP [r0th77]
Mar 07, 2007 (3:45 am)
My book doesn't go that far back and some did have a slave cyl that was set, so could be the slave has bad seals inside or same for master cyl.
#5 of 5 Carborator/Throttlebody
Nov 25, 2007 (7:29 pm)
I've got a 1987 /S15 Jimmy. It jerks real bad when I first take off. 1st and 2nd. gear are the worse. I've checked all the Vaccume lines coming off the carb.body and replaced any that were old and cracked. Any ideas would help.