Dodge Dakota rear-end noise

43 messages, Last post on Mar 16, 2009 at 11:43 AM

You are in the Dodge Dakota Forum. Your Host is kcram

What is this discussion about? Dodge Dakota, Suspension, Truck

#42 of 43 Re: this is as far as i have gotten [greasesister] by dustyk Mar 14, 2009 (9:58 am)
Replying to: greasesister (Mar 12, 2009 5:02 pm) I'm not sure where you are in the reassembly process, but you need a special tool (C-4164) you adjust the bearings. This is a long bar which is inserted through the opening at the end of the axle housing (axles removed) and rotates an adjuster plate that has a hexagon center inside the carrier. I'm thinking you have just replaced the differential bearings and may not be aware of how they are adjusted. Our good friend Greasesister has provided a detail instruction on the reassembly and adjustment process. Best regards, Dusty P.S. Thanks Greasesister. That was a lot of good information. You must be an avid typist!
#43 of 43 by greasesister Mar 16, 2009 (11:43 am)
no dusty iam not a very good typist at all i used the copy thing on the mouse yes you are right at where iam at ok got a good idea now on the next step might need your advice again have a great day