You are here:
Forums
Pickups
Toyota Tacoma
Toyota Tacoma 2004 and Earlier Frame Problem

923 messages, Last post on Nov 16, 2009 at 8:28 AM
You are in the Toyota Tacoma Forum. Your Host is kcram
|
Replying to: bubblepuppy (Mar 22, 2009 9:05 am) but if they are not in a high salt area then they prob wont have a frame issue. other than the frame having a problem with corrosion protection, the truck is rock solid.( no pun) I loved my truck and it was typical toyota quality. I assume that CR and others rave about it because they have not and may never experience this frame issue depending on where they live.
|
|
|
|
|
Replying to: bubblepuppy (Mar 22, 2009 9:05 am) The sales brochure for the 95 and 1/2 states: Tacoma's tough anti-corrosive steel frame resists rusting. That's one of the reasons I bought the truck. Sounds like something changed in the years following the first year? Mrbill
|
|
|
|
|
Replying to: mrbill1957 (Mar 22, 2009 5:54 pm) Was your VIN within the "Extended Warranty" range? Have you had your dealer give it "the inspection"? Have you taken any extraordinary protective measures under carriage? Are you the original owner? thanks for the post...maybe I'll hafta aim for a 1995.0 or older. Guess I'd get "more truck" for the $$ that way. thanks for posting.
|
|
|
|
|
Replying to: bubblepuppy (Mar 22, 2009 9:05 am) I love my truck, and even with all this pain and suffering, wouldn't buy anything else. I |
|
|
|
|
Replying to: bubblepuppy (Mar 22, 2009 6:57 pm) I purchased the truck new, and did have it undercoated. Although it may have helped with the outside of the frame from rusting, I don't think they did any spraying on the inside of the "box" of the frame, and other posts stated the rust is bad on the inside and outside the frame. I poked around myself in just about every hole I could reach into and did not find any scale. There must be some truth in the statement from Toyota that not all frames are prone to the problem. Kind of ironic for me, I wouldn't mind replacing my truck, but would rather get the 1.5x the KBB value for a rusted frame. BTW, mine is a 4x2, I wonder if the frame is different on a 4x4? The posts usually don't state if there truck is a 4x2 or 4x4. Mrbill |
|
| Hello. Has everyone who has had the frame swap satisfied with the results? Was there any misc. damage done during this process like dings and dents or scratches? I read somewhere they can do this in has little as 12 hours-wow. Please, some more remarks on the finished project would be appreciated. Thanks again. | |
|
Replying to: montucky (Mar 30, 2007 4:26 pm) It was about a 3 hour drive from where we lived, but the 1st dealers reputation is not very good and we did not want to deal with them at that point. Her second inspection showed a hole in the frame, and both of her cab mounts were gone. She also lost her brakes on the way over. When the rep. who met her asked, he could not believe they jepordized her life that way. All I can say is know your dealer & check out their reputation before going to see them. |
|
| I own a 2004 Tacoma and have not been notified by Toyota about this. I am having some work done today and asked my mechanic while he was underneath it to look it over for me. My mechanic is the one who told us about it when we stopped in to make an appt. to have some work done. | |
|
Replying to: doubleusn (Feb 02, 2009 8:19 am) |
|
|
Replying to: mcalautt (Mar 22, 2009 5:00 pm)
|
|
You are here:
Forums
Pickups
Toyota Tacoma
Toyota Tacoma 2004 and Earlier Frame Problem
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Toyota Tacoma
2010 Toyota 4Runner



Browse by Board
Browse by Topic
Today's Chats