Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Toyota Tacoma Toyota Tacoma 2004 and Earlier Frame Problem
929 messages, Last post on Dec 04, 2009 at 8:59 PM
You are in the Toyota Tacoma Forum. Your Host is kcram
|
Replying to: mags6 (Mar 02, 2009 2:21 pm)
|
|
|
Replying to: divwid (Mar 08, 2009 11:55 am)
|
|
|
Replying to: mags6 (Mar 09, 2009 6:09 pm) |
|
|
|
|
Gentlemen - I have not written in a while because I wanted to really get a feel for things, but I have been driving my '01 Tacoma with the new frame, etc. for three weeks now. No complaints. Handles better than when I bought it in 2003 and I have done my best to beat the hell out of it too to put Toyota's work to the test. Buyback wasn't an option for me, as with most of you I'm sure, but it's better than nothing and we all know that the "big three" would have told us to kiss their ass. Anyway, if there are specific questions I can answer, let me know.
|
|
|
Replying to: Sambone5769 (Mar 10, 2009 4:58 am) |
|
|
Hello all! -- Have been out of town, but now post "The News" Ref my post of Feb 09 - believe I may be the first one here to get my Taco back w/ the replacement frame. On Feb 10 I stopped by the dealer to ask a few questions re the replacement - Svc Mgr said "it's apart - want to see it?" There was my Taco - in pieces/chunks/components up/down etc. Frame was across the service area - naked (covered w/ a lovely light golden rust color!). At that point they were waiting for the replacement kit. Well, they must have gotten it in the next day, because they called my on Feb 13 to tell me it was done!. Only problem was they couldn't align the front wheels due tie rods ends "frozen" and they couldn't free them up. I argued why this not included in the work order (if frame hadn't needed replacemernt I wouldn't be facing that problem), but they were adament that it was not part of the deal. So I had to spring for new - cost $410 w/ labor - which labor I believe should have been included in the process - but will take that up w/ Toyota. Picked it up on Feb 14. They did a nice job - truck feels/runs like new, no rattles/squeaks. Only thing I noticed was that front and rear body sections are very slightly misaligned - gap between them maybe 1/4" larger on one side than the other. No big deal - shouldn't affect aerodynamics at 70 mph. |
|
|
|
| My 01' Taco's frame comes today and I was told I should have the truck back by the end of next week. I'm glad to hear from the folks on here that they have had no major issues thus far with their replacements as I am going through it right now. Rust inhibitor will be the next step -but my question is this - If we are getting new frames due to the old ones rotting out why doesn't Toyota or (DANA -the manufacturer) put rust inhibitor/preventative on/in them prior to the swap to help prevent future issues? Just an idea for Toyota I guess - just makes good common sense to me. | |
|
Replying to: silver01taco (Mar 11, 2009 4:42 am) usually what they do is negatively or positively charge the frames and then do the opposite to the inhibitor as they dip the frames. Not sure why they are telling you they are going to do it after the install. that does not sound good to me, sounds like they are going to undercoat it which is a friggin mess and doesnt protect anything. |
|
|
Replying to: silver01taco (Mar 11, 2009 4:42 am) I am also glad to hear replacements are going well. I ended up opting out of it as my circumstances did not allow for it to be an option to me. I am glad to hear that things are going well for folks and now that frames are avail things seem to be speeding up. Many folks had been waiting a long time for frames, and my 02 was deemed bad before there even was a letter to send out. Question to All: Does anybody know what product they are using to spray under the ones that are rusty, but are not considered a failure. Question to All 2: Do we know if the 2005-200x model run corectd the problem? My understanding was it is a rust from lack of protection spray problem, but also a design flaw in the frame so that moisture does no drain properly. Thoughts? Thanks -wsn
|
|
|
|
|
Replying to: doubleusn (Mar 11, 2009 5:03 am) I can't fathom why they would tell you they are putting an undercoating on (which doesn't do anything except increase the problem) other than to make you feel better. I'm curious how the 2005 and up frames are holding up... unless they have addressed the problem, we'll probably be hearing about this in a year or two.
|
|
You are here:
Forums
Pickups Toyota Tacoma Toyota Tacoma 2004 and Earlier Frame Problem
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Toyota Tacoma
2010 Toyota 4Runner
Browse by Board
Browse by Topic
Today's Chats
