Sign In Join 



Toyota Tacoma 2004 and Earlier Frame Problem

927 messages,  Last post on Dec 01, 2009 at 4:59 PM

You are in the Toyota Tacoma Forum. Your Host is kcram

What is this discussion about? Toyota Tacoma, Toyota 4Runner, Car Safety, Auto Body, Car Warranties, Truck


Messages Page 43 of 93
1
...
40
41
42
43
44
45
46
...
93
Prev
Next
Last
Go To Msg #
Search This Discussion

#420 of 927
Re: Concerned about my 2001 Toyota Tacoma (original owner) [rrichard1950] by schukanuoslady
Aug 07, 2008 (2:47 pm)
Reply

Replying to: rrichard1950 (Aug 07, 2008 10:43 am)

Call a dealer and tell them you got a letter even if you didn't. They don't ask for it and let them give you an appt. Heck...some of these dealers are starting to annoy me. It's not coming out of their pockets to have that truck sitting in their lots. And they don't have to worry about liability as you have to keep your insurance on the truck. Get it there fast as my truck was registered in NY for 2 yrs and inspection and 3 weeks later Toyota took it. I lost money for an exhaust manifold, 3 new belts, inspection and a yrs worth of Motor Vehicle regstration.
#421 of 927
Re: Frame Rust ingnorance [matthewota] by annjot
Aug 07, 2008 (10:34 pm)
Reply

Replying to: matthewota (Aug 07, 2008 8:00 am)

It doesn't matter if you are the first, second, third, fourth owner,etc and you don't need a letter. Just call your local dealer and ask to set up an appointment to have your frame inspected for rust. If you have any problems with the dealership or getting information after the inspection is done, then you want to call the 1-800 number. I had problems getting much info from my dealer so I called the toyota customer care center at 1-888-270-9371. When I told them I was calling because it had been two weeks since our inspection and still no word and the dealership wouldn't tell me anything they transferred me to another department and also gave me another number for that department which is 1-800-331-4331. The person I then spoke to gave me a case number and said they would turn it over to a person that will investigate the situation. they said that person would call me within one business day and someone called me the very next day as they said. So far they have been very nice and have called me back when they say they are going to and the girl investigating it even gave me her direct extension so I could contact her directly. I still don't know if our truck passed or failed and they said it could be a few more weeks until we know for sure. Meanwhile we can't drive the truck because it has a 6 inch lift on the front and a 3" lift on the back because we don't want to finish what we started until we find out if we are going to HAVE to keep the truck. The rear of our tacoma frame flakes off like potato chips but as bad as that looks they say they will only fail it if it has a hole all the way through. We'll see...eventually.....
#422 of 927
Re: Frame Rust ingnorance [annjot] by divwid
Aug 08, 2008 (6:10 am)
Reply

Replying to: annjot (Aug 07, 2008 10:34 pm)

Dear Annjot-My 2000 Tacoma did not have a hole in the frame to my knowledge. However at inspection they hammered very hard on frame to the point that they put a dent in the frame on one side at front. The other side they again hammered very hard on frame and it went through which created a hole in the frame. They then came to me in waiting room and said there was "one small hole" in the frame. No doubt frame was weak in that area. I never once saw flakes of rust or undercoating on my driveway or anywhere else it may have been parked. I wonder why they did not tell you right at the inspection whether your Tacoma passed or failed. I can't help but wonder if there are lots more old "clunkers" on the roads with rusted out frames. Bet they are not going through all these hassles as we Tacoma and former Tacoma owners are. Received offer letter from Toyota in one week to buy back Taco. Cheque will take 3 weeks, so they told me. Lady Taco owner in S. Ontario
#425 of 927
Oversize pictures... by kcram HOST
Aug 08, 2008 (6:20 pm)
Reply
Please use your CarSpace albums for these and/or a third-party photo site and provide a link to the picture. Posting oversize pictures causes major problems to the page structure of the forums.
 
Annjot, I had to take your posts down because they caused posts to actually stretch behind the menus on the right and thus left them unreadable. If you can post them in your CarSpace album - your homepage is http://ww.carspace.com/annjot - or provide links to where they are hosted, that would be appreciated!
 
kcram - Pickups Host
#426 of 927
Got my offer..... by jdailey23
Aug 09, 2008 (4:00 pm)
Reply
Well im meeting the agent at my dealership on Wed. morning, I had a 98 reg. cab Tacoma with 170,000 miles and they are giving me $11,000+ for it....thank you Toyota. My wife and I had talked about a new vehicle for some time now, this is a no brainer for me.
#427 of 927
Re: Frame Rust ingnorance [schukanuoslady] by woodduck99
Aug 10, 2008 (2:16 pm)
Reply

Replying to: schukanuoslady (Aug 07, 2008 2:35 pm)

I heard about the news on this frame rust issue via the net. I have not received a letter. I called Peoria Toyota (Illinois) and inquired about my 2000 Tacoma. I was referred to a gentleman at the dealership as he was the one that was handling the rust matter. He asked for my VIN and called ne back an hour later. He said my VIN was not one on the list and I should wait for a letter. I told him that I just went over 100,000 miles and I was looking to go through the truck front to back with brakes, trans fluid and filter, cooling system flush, etc. as I was looking to keep the truck long term and I did not want to invest all of this money if the frame was rusted out. He told me he would be glad to inspect my truck for rust for a $40.00 fee. HA!
I told him I would not pay the $40.00 fee and I would contact Toyota and I hung up. Five minutes later he called back and said he found an "updated" list and he would inspect it for free. I go Tues. the 12th for inspection.
#428 of 927
When VIN matters...'95 models only. by annjot
Aug 10, 2008 (10:01 pm)
Reply

Replying to: woodduck99 (Aug 10, 2008 2:16 pm)

Hi woodduck99, I got the same thing from the first dealership I called here in Alabama about an inspection. We have a 97 tacoma. They said my VIN number was not included. I called a second dealership and they said they can't go by the VIN and it would have to be visually inspected. When I spoke to the Toyota Customer Care Center about some of our other issues I asked her why the first dealership would have asked what the VIN number was and that it wasn't included. She didn't know why they told me it wasn't included and she said the only years the VIN would matter is the 1995 models. She said this is because half of 1995's were just "pickups" and half that year was the start of the Tacoma's. The trucks that were just "pickups" are not included.
He obviously didn't get an "updated list".... must have just double checked and found he was mistaken and instead of admitting his ignorance he made up an excuse. So typical of a dealership! If you need the numbers to the cusomter care center I included them in a previous post. Good luck! I am still awaiting word here in Alabama...it's been nearly 3 weeks since our inspection and we do not know if it has passed or failed yet.

Messages Page 43 of 93
1
...
40
41
42
43
44
45
46
...
93
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement