Last post on Nov 25, 2013 at 8:59 AM
You are in the Toyota Tacoma
What is this discussion about?
Toyota Tacoma, Toyota 4Runner, Car Safety, Auto Body, Car Warranties, Truck
#1254 of 1369 Re: How much perforation to get the buyback? [oxi04]
Feb 26, 2012 (6:58 pm)
I own a 01 Tacoma that's been well cared for, and received that letter issued at the beginning of 2012 which was a subject of inspection and applying a corrosive resistant application. Last week I went to a dealer to get my frame checked, and it was failed. I was quite surprised. The next steps they took was to mention their suggested recommendations for parts to be replaced out of MY pocket because they would be replacing my frame, leaf springs, break lines, emergency break cables. They were suggesting I replace shocks, and calipers and such, which I don't need to replace at this time, and are not an issue to pass NYS inspection. I was assured Toyota would do their best to cover parts needed to replace deemed necessary that were associated with the frame replacement, but no guarentee was given that when they were done, I wouldn't occur some cost. I was furious because it is Toyota that is opening up the can of worms on a truck 11 years old that may or may not come apart . I stated my truck is sound, and meets all safety standards of NYS, and they can go ahead and replace the frame, but if you break something in the process, you fix it. Toyota has the new frames for the 01-04, and are opting to replace frames in lue of any buy back. So, if your frame is weakened at all, your not going to get offered a buy out. My truck goes in tomorrow, and they're giving me a rental at their cost. I refuse to be responsible for any cost of Toyota's weak and uncoated frames. They want to tie up three bays in a dealership to tear my 11 year old truck completely apart and put it back together. I even asked for them to allow me to speak to any of the previous truck owners who went through the frame replacement so I wouldn't worry about how Toyota treated them. Their answer was NO. Don't look for a buy out folks. I'll let you know if they try to charge me anything when it's done.
#1255 of 1369 Re: How much perforation to get the buyback? [tac01orbust]
Feb 27, 2012 (6:46 am)
OMG, you should be so glad they are replacing your frame instead of you complaining about it. Are you aware that your truck will be like having a practically new truck after they're done? This is a $11,000.00 job Toyota is doing for you on their dime. I had my 2004 Tacoma with 160,000 miles on it reframed at no cost to me and it was like I said, "a new truck". Just say no to any items they want to replace that you think aren't necessary. If they break anything during the reframing they will replace that item at their cost also. Enjoy and be glad it wasn't a Ford, Chevy or Chrysler as you'd be up s*its creek if it was.
#1256 of 1369 Re: How much perforation to get the buyback? [terceltom]
Feb 27, 2012 (7:07 am)
I wouldn't say it was like having a practically new truck after they're done. Along with the Frame they also replace the leaf springs and brake lines. Most of us get rid of our vehicles becouse knobs fall off, rusty bumpers, nasty interior, etc.
#1257 of 1369 Re: How much perforation to get the buyback? [terceltom]
Feb 27, 2012 (9:39 am)
It is not like having a new truck. My father has an 01 Taco with a new frame. It is still pretty much the same truck.
I bought an 04 Taco and just 24 hours later found 2 soft spots on the frame which I was able to punch holes through with my finger. Sure, I should have done a more thorough inspection on the truck but that is not my point.
My point is, I was told directly by a Service Rep at the Toyota Headquarter in CA that my truck was not under warranty and that they would do nothing to help me. I returned the truck to the dealer. Two months have passed and now the dealer has new frame on that truck and it is back on the lot for sale.
Toyota is very misleading about their recall program.
#1258 of 1369 Re: How much perforation to get the buyback? [eallman]
Feb 29, 2012 (3:06 pm)
I was going to replace the brakes on my 99 tacoma today and noticed that my frame is rusted through(about 6 inches long and 2 inches wide)on the boxed part beside of the gas tank.Does this qualify for a buy back or replacement of my frame.
#1259 of 1369 Re: How much perforation to get the buyback? [ferrell1cars]
Feb 29, 2012 (3:23 pm)
Talk directly to your local Toyota Service Dept. You can find the actual chart used by Toyota Techs online. Just do some research and you will find lots of information. Good luck.
#1260 of 1369 Re: How much perforation to get the buyback? [eallman]
Feb 29, 2012 (5:05 pm)
Also,Is there any requirement as to how long you have to own it.I am supposed to be contacted in the morning about having my truck looked at but was just wondering.I bought the truck a couple months ago.
Mar 01, 2012 (6:02 am)
"I was going to replace the brakes on my 99 tacoma today and noticed that my frame is rusted through(about 6 inches long and 2 inches wide)on the boxed part beside of the gas tank.Does this qualify for a buy back or replacement of my frame. "
Yes, that was the same place my own truck was rusted through. They should buy it back from you.
Mar 01, 2012 (6:32 am)
You should be good with the '99 Tacoma being bought back. They are supposedly honoring the warranty extension on trucks that fall under 15 years from their original sale date, so 2012-1999 = 13 years. Toyota also told me that as long as the truck is currently registered and you have the title in your name, there is no problem with how long (or how short) you have owned the truck for.
The number to call is 800-331-4331. Get them to open a case for you. Have your VIN# handy. They should ask you where you want to take the truck for the inspection, and the rest should be smooth. I had a totally smooth transaction just last month on my 2000 Tacoma. They gave me a loaner for almost 30 days. As soon as you turn the title over to them, they will want the loaner back.
Don't take no for an answer. It's worth pursuing for sure. A 1999 Tacoma will be a buy-back, not a frame replacement. Good luck and let us know how you do. Dave
#1263 of 1369 Re: Yes [sweetd8943]
Mar 01, 2012 (7:37 am)
They wouldn't replace the frame, there are no frames available for the 1999 and before Tacomas. They only replace the 2000 to 2004 Tacoma frames as these frames are still being made.