You are here: Forums SUVs Isuzu Rodeo Isuzu Rodeo Lug nuts

Isuzu Rodeo Lug nuts

6 messages,  Last post on Nov 29, 2008 at 1:55 PM

You are in the Isuzu Rodeo Forum. Your Hosts are steve_ & tidester

What is this discussion about? Isuzu Rodeo, Isuzu Rodeo Sport, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#3 of 6 ROTO-LUG Eccentric Kit by sambo42xa Nov 27, 2007 (6:53 am)
Anyone heard of "Appliance Industries" / ROTO-Lug Eccentric Kit? I have here #5970, BUT I do not have the installation tool for them which is #5999. Company no longer exists. I know someone out there knows of these Kits OR perhaps has the installation tool #5999 that MAYBE I can purchase or perhaps borrow so I can remove the wheels from my car. My Dad purchased the Buick back in 1975 and had these wire wheels put on along with the ROTO-Lug Kit. The tool is no where to be found. I now have the car and need to remove these wheels. HELP! I have tried HEMMINGS, On-Line Auction, Swap Meets and a local Dealership who "sometimes" has old items around. Thank you, sambo42xa Replies to this message: nascar2403 (Jan 18, 2008 1:08 pm) srivera (Feb 24, 2008 10:08 am) bluebell3 (Nov 29, 2008 1:55 pm)
#4 of 6 Re: Lug Nuts! [sambo42xa] by nascar2403 Jan 18, 2008 (1:08 pm)
Replying to: sambo42xa (Nov 27, 2007 6:53 am) Hey, I recently bought 2 sets of the old Appliance Striker wheels. I have found the new gorilla brand lug nuts for it, and wondering exactly how the original set worked I happen to have found an original roto-lug eccentric kit (#5958) so I bought it. It came with a small (about 2-3) socket that fits over the eccentric part. If you want to reply I can email a picture of it to see if it would work. "> Replies to this message: srivera (Feb 24, 2008 10:08 am)
#5 of 6 Re: Lug Nuts! [nascar2403] by srivera Feb 24, 2008 (10:08 am)
Replying to: nascar2403 (Jan 18, 2008 1:08 pm) I have a 98 Rodeo. The lug nuts are fine, but Ihave had 3 of the actual stems break off when chaning the tires, how do you replace those?
#6 of 6 Re: ROTO-LUG Eccentric Kit [sambo42xa] by bluebell3 Nov 29, 2008 (1:55 pm)
Replying to: sambo42xa (Nov 27, 2007 6:53 am) I am a tool maker and if it was made once it can be made agane. I need to see what you got and we will try to make one. my laber rate is 25.00 per. If you realy need it email me. I love a challenge Larry "G"

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Isuzu Rodeo Isuzu Rodeo Lug nuts