You have saved this page | See all saved pages
Isuzu Rodeo Lug nuts
6 messages, Last post on Nov 29, 2008 at 2:55 PM
You are in the Isuzu Rodeo Forum.- Your Hosts are Stever@Edmunds & kyfdx
What is this discussion about? Isuzu Rodeo, Isuzu Rodeo Sport, SUV
- All Messages Displayed
#1 of 6 Lug nuts by nurrac
Feb 27, 2007 (8:02 pm)
I have a 96 Isuzu Rodeo, the wheel studs have come loose from the hub front n rear causing problems when it comes to removing a wheel or tighting a lug nuts properly, they either break off or just spin loosly in the hub, then when I try to buy new studs the hole is now rounded out to big, any suggestions, do I have them all welded in??, or anyone have success repairing this problem, Thank You .
- denotsko (Mar 11, 2007 8:09 am)
Replies to this message:
#2 of 6 Re: Lug nuts [nurrac] by denotsko
Mar 11, 2007 (8:09 am)
Replying to: nurrac (Feb 27, 2007 8:02 pm)
Having the same problem with a friend's car, except I cant even separate the hub to put the new lugs in. I didn't want to risk doing more harm than good so I stopped. How did you do it?
#3 of 6 ROTO-LUG Eccentric Kit by sambo42xa
Nov 27, 2007 (7:53 am)
Anyone heard of "Appliance Industries" / ROTO-Lug Eccentric Kit?I have here #5970, BUT I do not have the installation tool for them which is #5999.
Company no longer exists. I know someone out there knows of these Kits OR perhaps has the installation tool #5999 that MAYBE I can purchase or perhaps borrow so I can remove the wheels from my car.
My Dad purchased the Buick back in 1975 and had these wire wheels put on along with the ROTO-Lug Kit. The tool is no where to be found. I now have the car and need to remove these wheels. HELP!
I have tried HEMMINGS, On-Line Auction, Swap Meets and a local Dealership who "sometimes" has old items around.
Thank you,
sambo42xa
- nascar2403 (Jan 18, 2008 2:08 pm)
- bluebell3 (Nov 29, 2008 2:55 pm)
Replies to this message:
#4 of 6 Re: Lug Nuts! [sambo42xa] by nascar2403
Jan 18, 2008 (2:08 pm)
Replying to: sambo42xa (Nov 27, 2007 7:53 am)
Hey, I recently bought 2 sets of the old Appliance Striker wheels. I have found the new gorilla brand lug nuts for it, and wondering exactly how the original set worked I happen to have found an original roto-lug eccentric kit (#5958) so I bought it. It came with a small (about 2-3) socket that fits over the eccentric part. If you want to reply I can email a picture of it to see if it would work. ">
- srivera (Feb 24, 2008 11:08 am)
Replies to this message:
#5 of 6 Re: Lug Nuts! [nascar2403] by srivera
Feb 24, 2008 (11:08 am)
Replying to: nascar2403 (Jan 18, 2008 2:08 pm)
I have a 98 Rodeo. The lug nuts are fine, but Ihave had 3 of the actual stems break off when chaning the tires, how do you replace those?
#6 of 6 Re: ROTO-LUG Eccentric Kit [sambo42xa] by bluebell3
Nov 29, 2008 (2:55 pm)
Replying to: sambo42xa (Nov 27, 2007 7:53 am)
I am a tool maker and if it was made once it can be made agane. I need to see what you got and we will try to make one. my laber rate is 25.00 per. If you realy need it email me. I love a challenge Larry "G"
- All Messages Displayed
To POST a message, please
Sign In.
Advertisement
Most Popular in Forums
Search Forums
Enter Keyword(s):
Learn More, Do More
Edmunds Community
Advertisement