You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Warning lights and trouble codes

Chevy S10 - GMC S15 and Sonoma Warning lights and trouble codes

63 messages,  Last post on Oct 08, 2008 at 1:38 PM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, Auto Repair, Truck

Messages Page 7 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

#54 of 63 1997 gmc sonoma check engine on OBD II won't scan ? by wannarace Jun 03, 2008 (8:29 am)
I have a 1997 gmc sonoma 4x4 6 cyl check engine light on and the obd II won't scan. I checked the scanner with another car and it works fine ? Replies to this message: gonogo (Jun 03, 2008 8:49 am)
#55 of 63 Re: 1997 gmc sonoma check engine on OBD II won't scan ? [wannarace] by gonogo Jun 03, 2008 (8:49 am)
Replying to: wannarace (Jun 03, 2008 8:29 am) Check your cig fuse, it is diagnostic power also.
#56 of 63 Sonoma 2000 by darcy4 Jun 04, 2008 (10:25 am)
#57 of 63 Sonoma 2000 by darcy4 Jun 04, 2008 (10:25 am)
2000 Sonoma extended cab v6 engine   MY check engine lights AND ABS lights Brake lights are coming Have all new brakes and tires put on not long ago so know this is not the problem Took to dealer and they said they fixed it also over driving for a while it shifts hard into first gear   3 weeks later it is happen again any fix suggestion Thanks
#58 of 63 check engine light 97 gmc sonoma by wannarace Jun 18, 2008 (10:27 pm)
check engine light on again came up cyl 6 misfire I changes plugs reset engin light 2 dats later check engine light on again comes up cyl 6 misfire again any thoughts?
#59 of 63 Where is this sensor located? by rcrick0 Jun 09, 2008 (11:37 am)
#60 of 63 Where is this sensor located? by rcrick0 Jun 08, 2008 (7:38 pm)
hello i have a 2000 chevy s-10 v-6 engine light came on for while and went off , then came back on , now the truck wont start , i ran the problem code its the evaportive emission system pressure sensor/ switch, so where is the located , i looked in the repair book but doesnt show it or nothing   thanks Rick D. Replies to this message: gonogo (Jun 09, 2008 11:37 am)
#61 of 63 Re: Where is this sensor located? [rcrick0] by gonogo Jun 09, 2008 (11:37 am)
Replying to: rcrick0 (Jun 08, 2008 7:38 pm) It usually means the gas cap is leaking, but it won't stop it from starting.
#62 of 63 ENGINE CODES by tituscanby Sep 13, 2008 (4:38 pm)
I KEEP GETTING CODES 24 AND 34.I HAVE REPLACED BOTH AND CLEARED THE CODES BY REMOVING THE BATTERY CABLES AND THEY STILL KEEP SHOWING UP.THIS IS ON A 1986 S10
#63 of 63 OBDll error by tnyodm Oct 08, 2008 (1:38 pm)
I've tried to scan my 95 S-10 with 3 scanners but they all give an error reading. No blown fuses. Any suggestions? Thanks, Tony.

Messages Page 7 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Warning lights and trouble codes