Last post on Jun 25, 2013 at 7:07 PM
You are in the Chevrolet S-10 & GMC S15 Sonoma
What is this discussion about?
Chevrolet S-10, Auto Repair, Truck
#48 of 95 Chevy S-10 1999 4.3L P0300 Code
Jan 07, 2008 (7:20 pm)
Ok so this morning I was on my way to work NO PROBLEMS... stopped for gas(shut the truck off)... filled the tank... went to start the truck.. and thats when the problem started... check engine light... (flashing random pattern) and rough idle as well as running.. went to Advanced auto after work and had them read the computer P0300 code (Multi-Cylinder Misfire) so picked up plugs and wires... (Bosch Platinum 2s and Autolite Professional) and changed them all out (record time too, 2 hrs) anyways still have the problem... any help?
#49 of 95 Re: Chevy S-10 1999 4.3L P0300 Code [djcrzysounds]
Jan 12, 2008 (9:46 am)
Sounds like a cap/rotor failure or fuel pressure issue. Remove the dist. cap and check for watermarks, wear, or carbon tracking. Replace them if you see a problem. also if your fuel filter has not been changed it would be a good idea, being significantly less than a fuel pump. Bosch and Autolite SUCK in GM ignition systems, so replace with ACDelco unless you like changing parts often. You really get whatyou pay for in ignition (and any other electrical) parts.
Hope this helps, and its not a dirty injector or valvetrain issue
#50 of 95 Chevy S10 code PO147
Feb 14, 2008 (11:48 am)
I'm trying to find out what a Code PO147 HO2S Heater Performance Bank 1 Sensor 3 code applies to. This is on a 99 Chevy S10. Do you know?
#51 of 95 1995 S-10 replace OBD I with OBD II
Apr 13, 2008 (10:30 am)
Can the OBD I computer in a 1995 S-10 be replaced with an OBD II computer?
#52 of 95 Re: 1995 S-10 replace OBD I with OBD II [davewilliamson]
by KCRam@Edmunds HOST
Apr 13, 2008 (3:08 pm)
Most likely not, because the necessary sensors for OBD-II won't all be there.
kcram - Pickups Host
#53 of 95 1996 s-10 2.2 code p1886 mfg specific
May 27, 2008 (6:26 pm)
i can't find what this code is in my chiltons book. can any one help with this code. the reader says that it is manufacturer specific. i got that code, then the engine stalled and noe it will carnk over, but not start at all. i am getting fuel and spark. ready to pull my hair out next.
#54 of 95 1997 gmc sonoma check engine on OBD II won't scan ?
Jun 03, 2008 (7:29 am)
I have a 1997 gmc sonoma 4x4 6 cyl check engine light on and the obd II won't scan. I checked the scanner with another car and it works fine ?
#55 of 95 Re: 1997 gmc sonoma check engine on OBD II won't scan ? [wannarace]
Jun 03, 2008 (7:49 am)
Check your cig fuse, it is diagnostic power also.
#56 of 95 Sonoma 2000
Jun 04, 2008 (9:25 am)
#57 of 95 Sonoma 2000
Jun 04, 2008 (9:25 am)
2000 Sonoma extended cab v6 engine
MY check engine lights AND ABS lights Brake lights are coming
Have all new brakes and tires put on not long ago so know this is not the problem
Took to dealer and they said they fixed it
also over driving for a while it shifts hard into first gear
3 weeks later it is happen again any fix suggestion