You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Warning lights and trouble codes

Chevy S10 - GMC S15 and Sonoma Warning lights and trouble codes

76 messages,  Last post on Nov 10, 2009 at 12:39 PM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, Auto Repair, Truck

Messages Page 5 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

#36 of 76 check engine light by kennyb Jun 04, 2007 (8:03 am)
check engine light on 97 s10 2.2,,code reads "p1133 manufactur controlled fuel and air metering" have replaced 'Map Sensor controll' didnt help..any ideas where to try next ? thanks Replies to this message: gonogo (Jun 05, 2007 9:15 am)
#37 of 76 Re: check engine light [kennyb] by gonogo Jun 05, 2007 (9:15 am)
Replying to: kennyb (Jun 04, 2007 8:03 am) "DTC P1133 O2S Insufficient Switching Sensor 1" This is what I get for a 99 Sonoma 2.2. GM codes are pretty much standard. It refers to the oxygen sensor in the exhaust manifold. The code does not mean change it, it means check it out.
#38 of 76 1999 sonoma brake warning light by jatkins Aug 18, 2007 (2:06 pm)
#39 of 76 1999 sonoma brake warning light by jatkins Feb 17, 2007 (5:11 pm)
Have about 70k, 4 cylinder, auto. ext cab.   Brake warning light came on, brake res. a little low, brake petal a little soft & low. bought truck used at 30k and no brake work.   Will warning light come on with pads low? not making noise or pulling, driving spareingly for next two-three weeks when I can get it worked on. Replies to this message: canufixit (Feb 19, 2007 9:07 am)
#40 of 76 Re: 1999 sonoma brake warning light [jatkins] by canufixit Feb 19, 2007 (9:07 am)
Replying to: jatkins (Feb 17, 2007 5:11 pm) Hi,   Step on your Emergency brake light - and see it it get's brighter ?? I've heard that the break warning light will com on when the emergency brake is on - AND - it will light at "partial" brightness when the computer sees a problem with the Brakes as well (i.e. ABS sensor). If what I heard is correct - it may be a wheel sensor needs replacement or adjustment ...   Please let us know what the actual fix is ???   Canufixit
#41 of 76 1998 s-10 pu wiring troubles by dkeller1 Feb 19, 2007 (7:18 pm)
#42 of 76 1998 s-10 pu wiring troubles by dkeller1 Feb 19, 2007 (7:18 pm)
I recently bought a 1998 s-10 with 60,000 miles, when i looked at it, the starter turned hard, and it wouldn't start on ether, but i figured the price was ok and if I put a starter on it would turn faster and start, so I put a new starter on , and now, nothing the lights buzz inside, but there is nothing inside, it came with copied keys, so I took it to a local, and he changed the colm for 400$ to a junk yard one, well, still nothing he told me to take it to a dealer, I told him all your good for is putting new parts on, so what ever, now I have a truck with 60,000 miles and a clean body, that don't run, what should i do I either thought take it to a dealer, buy a wrecked truck, change the harness, buy a wrecked truck, change the motor and selected body panels, what do you all think, and how hard is the harness to do on this truck?   Thanks    Dan Replies to this message: gonogo (Sep 23, 2007 7:10 am) philscbx (Nov 14, 2007 3:31 am)
#43 of 76 Brake Light by darcy2 Aug 18, 2007 (1:48 pm)
If this helps I find that my brake lights come on when air is low in tires
#45 of 76 Re: 1998 s-10 pu wiring troubles [dkeller1] by gonogo Sep 23, 2007 (7:10 am)
Replying to: dkeller1 (Feb 19, 2007 7:18 pm) You need to find a better mechanic. Replies to this message: philscbx (Nov 14, 2007 3:31 am)

Messages Page 5 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Warning lights and trouble codes