You are here:
Forums
Pickups
Dodge Ram
Dodge Ram Oil Questions

23 messages, Last post on Sep 01, 2009 at 6:51 PM
You are in the Dodge Ram Forum. Your Host is kcram
|
I lost the clutch on a 2005 Ram 2500 at 55,000 miles. The dealer first replaced the hydraulics and no change so they said the pressure plate had collapsed. No marks of abuse, overheating, checking or excessive wear. Clutch plate is over 60%. Replaced clutch, pressure plate and bearings now the clutch pedal seems to be one third of the effort to press in. I am attempting to force Dodge to admit a defective pressure plate but as everyone knows I am fighting a brick wall! Any help or ideas will be a major asset in my battle! |
|
|
|
i have a dodge ram 2009,that the oil light was coming on and staying,they told me to change the oil,so i did.this did not help.the oil light stays on.now my motor is baked.was some thing going on when the light was staying on.there was only 10500km. on the motor.hope you can help me .catandmouse :
|
|
|
Replying to: catandmouse (Jul 28, 2009 11:47 am) Does anyone know if the old warrantees are still good? I bought an 07 RAM 1500 and purchased the additional extended warrantee at the time of purchase. Still good under the "new Chrysler" or not? Ski in TX
|
|
| I have a 2004 viper ram truck with the 505 monster under the hood. At 29000 miles I am having to rebuild this very expensive engine. I was told that I spun the bearings on the fourth piston. Does anyone here know how this happens,when it is full of oil and there seems to be nothing wrong with it. This things runs like a race car. And I take better care of it than a Million Dollar Rich man. | |
|
Replying to: stanoski (Jul 28, 2009 2:42 pm) |
|
You are here:
Forums
Pickups
Dodge Ram
Dodge Ram Oil Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Dodge Ram Pickup 2500
1993 Dodge RAM 250



Browse by Board
Browse by Topic
Today's Chats