You are here: Forums Hatchbacks Acura Integra Acura Integra Engine Questions

Acura Integra Engine Questions

98 messages,  Last post on Aug 04, 2009 at 9:24 AM

You are in the Acura Integra Forum. Your Host is pf_flyer

What is this discussion about? Acura Integra, Engine, Hatchback

Messages Page 9 of 10 1 ... 4 5 6 7 8 9 10 Prev Next Last

Go To Msg # Search This Discussion

#81 of 98 it's wierd by vore1er Jan 04, 2009 (12:44 pm)
sorry i just went out to my 94 integra and it started. The only difference is that the outside temp drop about 30 degrees from yesterday . so i don't know. i never heard of a car starting better when it's cold outside.the temp today is 47 .
#82 of 98 Re: what models/years had the B18A1 [brettl] by bigal92 Feb 06, 2009 (8:30 pm)
Replying to: brettl (Oct 18, 2008 12:01 pm) ok the B18A1 was only used in the 90-95 integra non VTEC models but it dosn't end there from 90-91 the computer system that was used was OBD-0 from 92-95 the computer system was OBD-1 wich means that you would have to convert the wiring harnes to OBD-1 and get an OBD-1 computer or you can us all of the components from the engine you already have on the new engine.   or if you want to go with VTEC you can get a JDM B16A that came in the JDM intega for like $1100-$1600 plus S&H and it will come with the engine, tranny, ECU (computer) wiring harnes, and all of the components plus you can get them in OBD-0   B18A1 1.8L 130HP 6000RPM & 126 ft-lb 5000RPM redline 6500RPM B16A 1.6L 160HP 7600RPM & 111 ft-lb 7000RPM redline 8200RPM
#83 of 98 90 integra code 43 by dwreills Feb 10, 2009 (6:32 am)
On Jan 2 my 90 Integra LS would turn over but not start. Computer code was 13 (barometric pressure sensor). Outside temp. had risen to about 40f and was somewhat humid. Started fine later in the day and been running fine since. Feb 8 same scenario but code 43 (fuel delivery system) and today car started fine ran about 3 miles and died, same thing, code 43 (Temp about 42f and foggy with all the snow melt). Both new instances car started after waiting with the hood open for about 20 minutes. Any clues anybody? (Has about 227K and normally runs well)
#85 of 98 Re: Hi I got a question about 2 diferent engine types [whobodym] by integer91 Mar 03, 2009 (4:24 pm)
Replying to: whobodym (Oct 11, 2008 9:54 am) i no one reason is now that the intake manifold is in the front now there is no heat from the exhuast the manifold is the first thing the air wood hit cooler air little more power
#86 of 98 Re: 94 intrega don't turn over, [vore1er] by integer91 Mar 03, 2009 (4:30 pm)
Replying to: vore1er (Jan 03, 2009 12:06 pm) wat u mean is ur engine is cranking over but not starting cuz if ur engine didnt crank over it wood be ur starter like the other guy said check ur spark first
#87 of 98 89-89 d16zc intake manifold by d_kem_16 Mar 06, 2009 (9:33 pm)
does anyone know where to get an intake manifold for this head type, doin a head swap but the current IM does not match up cuz of the bolt pattern and gasket...... i've been looking for days now and need a hand. this head is pretty rare when you don't buy it as one unit, igot a steal on the head tho!!!
#88 of 98 92 Integra Belt Questions by kirama1 Mar 09, 2009 (8:10 am)
Does anyone know which belts are which in the 92 Integra, and if they are easy to fix yourself? The belt that broke on mine broke while it was idling, and there is still a sliver of the belt still turning. Im afraid to risk driving it, so im not sure if it will drive. Its the lowest belt I can see, and its attached to three pulleys.
#89 of 98 morning stalls by wavtam Apr 06, 2009 (9:24 am)
2001 with 100,000. Just recently I've notice that the car will start immediately, but will stall when I drive to the end of the street with stop sign. A little hard to start then. Once I reach normal operating temperature, no problems. Then pattern repeats daily. Your thoughts. WAVTAM Replies to this message: brettl (Apr 08, 2009 11:36 am)
#90 of 98 Re: morning stalls [wavtam] by brettl Apr 08, 2009 (11:36 am)
Replying to: wavtam (Apr 06, 2009 9:24 am) I'd suggest that first thing to do, is to pull the codes off the ECM, and go from there. There's too many possible causes to even begin to think about, but if there are any codes stored in the OBD system, that'll start you at least in a particular direction.

Messages Page 9 of 10 1 ... 4 5 6 7 8 9 10 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Hatchbacks Acura Integra Acura Integra Engine Questions