102 messages,
Last post on Aug 11, 2011 at 9:39 AM
You are in the
Subaru Legacy & Outback Forum.
What is this discussion about?
Subaru Legacy, Brakes, Sedan
#91 of 102 Subaru brake pads vs generic
by gotfiddle
Nov 09, 2009 (6:59 pm)
About to put the first set of replacement brake pads on our 2006 Outback at 84,000 miles, and the dealer wants $550. I can get ceramic pads put on elsewhere for $450, any reason to go with factory replacement pads? The brakes have no issues, just started to squeek about a month ago when the pads finally got thin enough. I'm willing to spend the extra $100 if it's worth it, but hate to make the donation to the dealer if the same product is found elsewhere. Are Subaru OEM pads better? Thanks for any input!
#92 of 102 Re: Subaru brake pads vs generic [gotfiddle]
by xwesx
Nov 09, 2009 (7:15 pm)
$550 for a new set of pads?! That's insane! You could do this job yourself in about 45 minutes including setting up and cleaning up afterward. Pads cost around $120 or so for a front set.
I see no reason to go to the dealer for that service.
#93 of 102 Re: Subaru brake pads vs generic [xwesx]
by ateixeira
Nov 10, 2009 (11:35 am)
I think the pads cost even less.
I don't recall what I paid for the front brake pads on my Forester, but for my 93 Miata they cost $17. Both sides, front axle.
No kidding.
#94 of 102 Chronic break problem
by pmf823
Dec 30, 2009 (2:46 pm)
I have an 01 ll bean outback with 125k miles. Had all 4 rotors and pads replaced (not resurfaced) five years ago at 80k miles by local repair shop. Brought into my Subaru dealer 2 years ago for 105k tune-up and they told me all 4 rotors and pads had to be replaced again (not resurfaced), so I had the work done by them figuring my local shop screwed-up. Now I've just been told by someone who put snowtires on my car that the rear two rotors are bad - one might be able to be resurfaced but the other is too "pockmarked" and needs to be replaced. Front rotors are better but not great.
What is going on with my brakes??? Haven't driven the car hard - mix of city/highway. Is there some kind of chronic problem with this model's brake system? No way am I going to pay anyone to do any brake work unless they can pinpoint why 4 rotors fail first after 25k miles and 1 or 2 again after 20k miles.... I'm first going to bring the car back to the same Subaru dealer since I would think they'd have the most experience with this model, but the problem isn't under warranty, and I find that repairmen look for the quickest fix, and don't know how to look deeper for systemic problems, unless you tell them where to look.... So would appreciate anyone's thoughts and advice. Thanks!!
#95 of 102 Re: Chronic break problem [pmf823]
by ateixeira
Jan 01, 2010 (3:46 pm)
Are the shops using OE quality replacements? I wonder if they're just using the cheapest parts they can possibly find, perhaps?
#96 of 102 Re: subaru brake issue [sharp_325is]
by blember
Mar 02, 2010 (2:58 am)
Subie#1: 133k, drove from pacific northwest thru canada
Subie#2: 210k, drove from queensland to western australia, thru tasmania
Subie#3: 230k, drove from alberta to baja california
Subie#4: 120k, drove from oregon to louisiana and back, twice
A Subaru has never failed me on the road.
#97 of 102 Re: subaru brake issue [sharp_325is]
by grahampeters
Mar 02, 2010 (3:34 am)
G'day
When I follow the link, I find a recall from the 1968 Plymouth Valiant. I'd call that false and misleading advertising on your part!
Cheers
Graham
#98 of 102 Re: subaru brake issue [sharp_325is]
by ingvar
Mar 02, 2010 (7:32 am)
Wow!!!! It is story about my old Honda accord!!!! BTW, I switched my IS350 to Legacy 3.6R Limited and I'm happy!!!
#99 of 102 Chronic Rotor Problem
by designman
Jul 05, 2010 (6:11 am)
My 02 Outback has over 160K miles. I really like the car. You know, it's like an old dog, you don't want them to leave. I want it to be around 'til it needs to be put out of its misery.
However.
I'm on my third set of front rotors in the last 60K miles. IIRC, the originals lasted considerably longer but after that it was frequent front rotor/pad relacements with OEM parts. This last set was not OEM, figured I'd try them to see if they were any better. They're worse and and need replacing after 12K.
It seems DIY is easy enough but I really need to see it being done first.
Anyway, what's with this rotor problem? My friend also has an Forester with 23K and his front rotors are starting to go. I've also heard of rotor issues on other non-Subaru vehicles.
What's the deal? Is it poor manufacturing or design... uneven wear or warpage due to rotors being too thin to begin with? Could faulty installation be a problem? Rotors should get over 60K, easy.
#100 of 102 Re: Chronic Rotor Problem [designman]
by xwesx
Jul 07, 2010 (11:37 am)
Rotors should get over 60K, easy.
Yes, they should. My '96 Outback had originals through 220,000 miles, which is when I ceased owning it. It braked smoothly that whole time. Of course, it was only on its second set of pads (both front and rear), too.
Proper installation is important, as is even pressure from the lug nuts, but neither of those things is difficult to achieve, even by a home DIY'er with no experience.
If you brake hard and frequently, it may just be that the rotors are undersized for your duty requirements and cannot shed the heat fast enough. Have you tried drilled/slotted rotors? Those are often used in performance applications and may be able to resist warping by shedding heat better. Of course, I am assuming that warping is the problem that is killing your rotors.