You are here: Forums Coupes & Convertibles Chevrolet Camaro Chevy Camaro Maintenance and Repair

Chevy Camaro Maintenance and Repair

45 messages,  Last post on Nov 05, 2009 at 12:57 PM

You are in the Chevrolet Camaro Forum. Your Host is claires

What is this discussion about? Chevrolet Camaro

Share questions and tips on doing your own repairs and maintenance on your Camaro.

Messages Page 6 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

#42 of 45 Re: Noobie here..... [ut_camaro_guy] by Mr_Shiftright HOST Sep 07, 2009 (7:05 am)
Replying to: ut_camaro_guy (Sep 06, 2009 9:25 pm) Well first thing you should do is go on an alignment machine and see if the car can even be made to go in a straight line. If the entire body is "crabbed" and alignment isn't possible, just get rid of the car.   If the car can be aligned, then your problems are strictly sheet metal, and strange as it sounds, some basic wrench work and a short handled 3 lb sledge hammer will do the job---presuming you know better as to not start hammering on plastic or thin metal bracing, but rather only on main, hidden, structural supports such as bumper braces or radiator sub-framing. Another alternative is to rent a portable hydraulic tool that has attachments for bending, pushing, etc. this way and that, and is able to get into small spaces. Replies to this message: ut_camaro_guy (Sep 07, 2009 7:36 am)
#43 of 45 Re: Noobie here..... [Mr_Shiftright] by ut_camaro_guy Sep 07, 2009 (7:36 am)
Replying to: Mr_Shiftright (Sep 07, 2009 7:05 am) Hey,   Thanks for the info! Now I'm a bit nervous, but still optimistic. As best as I can by eyeballing it, the underframe itself appears to be in a straight line, so I'm hoping it's as you said, sheet metal, a hammer, and a few new parts should do the trick. I'd hate to think that I paid for something that I'm just going to have to get rid of. I'm taking it to the shop to get an alignment this week, so I'll post and let you know the outcome.....   Thanks for replying! I think I'm going to like it here!   Sean
#44 of 45 99 camaro v6 heating problem by trail03 Oct 24, 2009 (9:56 am)
The car drove fine after I changed the waterpump and thermostat and the holes drove for 2 days and on the third day it started to heat up so I pulled over and let the water out waited 5 mins and then drove the car home and it stayed at 180 degrees the normal temp is between 180 and 210 can anyone tell me what to do can it be the radiator need a good clean out
#45 of 45 press request by kirstie_h HOST Nov 05, 2009 (12:57 pm)
A reporter is looking to speak to a recent buyer or a current shopper of a Chevy Camaro, Dodge Challenger Ford Mustang or Nissan 370Z . Please send your daytime phone number to ctalatiedmunds.com by Tuesday, November 10, 2009.   Thanks, Chintan Corporate Communications Edmunds.com

Messages Page 6 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Coupes & Convertibles Chevrolet Camaro Chevy Camaro Maintenance and Repair