38 messages,
Last post on May 04, 2013 at 10:42 PM
You are in the
Jeep Cherokee and Jeep Grand Cherokee Forum.
What is this discussion about?
Jeep Grand Cherokee, Jeep Grand Cherokee SRT-8, SUV
#18 of 38 Re: Rear tailgate selinoid [dixiecrawler]
by 99limited
Feb 03, 2008 (3:21 pm)
Could you pass on to me the solution you had in mind. This has become a real pain
#19 of 38 Re: Rear tailgate selinoid [dixiecrawler]
by larball
Mar 25, 2008 (1:10 pm)
Did you ever get a reply from dixiecrawler about fixing the tailogate?
#20 of 38 Coolant sensor bad
by oshea
Apr 27, 2008 (3:12 pm)
I have a 1996 Grand Cherokee, V-8. Coming up on 190,000 miles and I am receiving a message "Coolant sensor bad". Can anyone tell me/assist me with what and were to check/replace/address this message/warning. Thanks.
#21 of 38 liftgate won't open with less than 50k on the Jeep
by 05jeepman
May 31, 2008 (6:39 pm)
I just posted this as a new topic. Guess I should have searched a little before hand.
#23 of 38 lift gate won't open
by 05jeepman
May 31, 2008 (6:32 pm)
I have an '05 J GC Laredo, and cannot get the liftgate open. Is there a fuse or something that I should change out. Also, one of the brake lights is out, and I need to change it before I get a ticket. Anyone know how to get the liftgate to work again???
#24 of 38 Re: liftgate won't open with less than 50k on the Jeep [05jeepman]
by Stever@Edmunds HOST
May 31, 2008 (9:45 pm)
just posted this as a new topic
No biggie - we'll just move the post over here.
#25 of 38 01 GC - Tailgate won't open
by cvgtpc1
Feb 02, 2009 (7:03 pm)
For the last year my locks were making a strange noise when opened or locked. Noise is now gone but now the tailgate won't unlock. I can't find a key lock on the tailgate anywhere to open manually, I guess they assume you'd always have the electronic lock working. How can I get the tailgate open and does it sound like I need to replace the tailgate lock solenoid?
Thanks,
Dennis
#26 of 38 Re: Tailgate problems [jeeps2]
by Ragtopmania
Feb 13, 2009 (9:39 pm)
I had just about given up when I ran across your 'how to." It saved me a bunch of headaches and I thank you. After getting the gate open I saw the irritatingly under engineered
rod retainer system. After I make the rod retainer tighter I'll give it double protection with safety wire. Thanks again.http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webx- icons/emotorcons/emo_smiley.gif