You are here:
Forums
Sedans
Volkswagen Passat
Volkswagen Passat Brake Questions

71 messages, Last post on Nov 17, 2009 at 10:29 AM
You are in the Volkswagen Passat Forum. Your Hosts are pat & karens
|
|
|---|---|
Hi to all. I own a VW Passat 00, 2.8L, 6 cyl car. Recently on a HW at 65 mi/h (I was not using brakes at the time) the display showed STOP and the other one showed ABS and flashing BRAKES. I stopped the car. A few days ago it also started showing a tracking control symbol. Sometimes these messages come up when I just turn the car on in the morning. Sometimes I see them after I start driving or no messages at all for the duration of the trip...My mechanic hooked up a computer (nothing was shown on the display), drove the car, cleaned the monitoring devices on all 4 wheels. The car drives the same. I did not experience any changes when I use brakes. Thanks to all for any suggestions you may have. Have a great day!
|
|
|
|
|
Replying to: own_passat00 (Jul 30, 2007 7:14 am) HTH...
|
|
|
|
|
Replying to: 600kgolfgt (Jul 31, 2007 2:57 am)
|
|
|
Hello Everyone!I own a 99 Passat.ABS light and flashing Brake light stays on all the time. Everytime I press my brakes the Tach needle drops to 0 and my oil light starts to blink, Meanwhile the car stays idle as if nothing is wrong. When I release the brake, all goes back to normal.(Until I need to stop again.) I replaced the Brake switch but that only worked for 5 minutes. I'm affraid to turn on the radio cause the wipers may come on.(Kidding)Please, Can anyone out there help me out. |
|
|
|
|
Replying to: own_passat00 (Jul 31, 2007 7:25 am) own_passat00
|
|
|
|
|
Replying to: own_passat00 (Aug 22, 2007 8:09 am) The brake light switch fixed the problem in my wife's 2003 Passat, but her car has the lighter 1.8T engine... |
|
|
Hi, I recently posted a question I had about ABS Brake lights and modules in another forum. I have a 99 VW Passat. Had the lights come on and rather than replace the ABS Brake Module had the module reconditioned which did the trick. Saved close to $2k. The light however has returned about a year later. Subsequent reconditioning hasn't worked. Now I mechanic pulls codes: P1602 18010 Power Supply (B+) Terminal 30 Low Voltage P1606 18014 Rough Road Spec Engine Torque ABS-ECU Electrical Malfunction Reconditioner says these are not problems in the ABS. That it has to do with the ECU and that they are soft codes. What's a soft code? That they can be cleared. Anyone know anything about this? If you anyone has any questions about removing the module and reconditioning I can point you in the right direction. I've gotten super good unfortunately at getting this thing out of the car. Thanks!!
|
|
|
|
|
Replying to: hdabe (Sep 04, 2007 1:18 pm) own_passat00 |
|
|
|
|
Hello, guys I have a Passat 2000, 2.8l, 6 cyl. See messages #11, #19. I had an ABS module replaced and installed a new brake light switch. The Brakes and ABS stopped flashing, but I have a traction control triangular symbol permanently displayed now (before I replaced the module it was occasionally seen). It does not disappear if I press the traction control button. Do you have any idea what maybe the problem now? How to fix it? Thanks. own_passat00 |
|
You are here:
Forums
Sedans
Volkswagen Passat
Volkswagen Passat Brake Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Volkswagen Passat



Browse by Board
Browse by Topic