- #82 of 90
-
Re: New Tacoma driveline vibration! [nelz1]
by will39
-
Nov 16, 2008 (7:28 am)
-
|
|
Replying to: nelz1 (Dec 12, 2007 10:59 am)
Toyota now has fix for this,Rear motor mount replacement will stop this
vibration, Had mine replaced with heaver mount,Moter was vibrating
at 20 mph.Call your deler new bullitin out on this.
|
- #83 of 90
-
Re: New Tacoma driveline vibration! [nelz1]
by will39
-
Nov 16, 2008 (7:43 am)
-
|
|
Replying to: nelz1 (Dec 12, 2007 10:59 am)
Toyota now has fix for this,Call dealer about bullitin on this.Need to replace
rear motor mount,With new heaver mount to stop motor from Vibrating at low
speed Had mine replaced stoped vibration.
|
- #84 of 90
-
Re: Vibration noise under hood [rko9869]
by will39
-
Nov 16, 2008 (7:51 am)
-
|
|
Replying to: rko9869 (Dec 26, 2007 7:17 am)
Replace rear motor mount Toyota has bulitin out on this, Replace with new
hever mount,Stops drive line vibrations also.
|
- #85 of 90
-
Re: New Tacoma driveline vibration! [will39]
by sergeante6
-
Nov 17, 2008 (11:44 am)
-
|
|
Replying to: will39 (Nov 16, 2008 7:28 am)
This rear motor mount seems to be the best answer I've gotton so far concerning my vibration. Will let you know what my dealer has to say about it. 
|
- #86 of 90
-
Re: New Tacoma driveline vibration! [will39]
by brepei
-
Nov 20, 2008 (11:25 am)
-
|
|
Replying to: will39 (Nov 16, 2008 7:43 am)
Hi will: do you know if the bulleton from toyota about replacing the rear motor has to do with drive line vibrations? Do you happen to know what the number or title of this bulletin may be so I can refer to it when I contact the service maniger at our local dealership? thanks sam c.
|
- #87 of 90
-
07 trd vibration
by bkellison
-
Jan 31, 2009 (7:19 am)
-
|
wifes trk has a vibration at highway speed that comes and goes. dealer has replaced tires and road forced them 4 times,then referred me to an authorized bribgeston dealer for 2 more balance and road force attempts. not much improvement! Took truck to dealer #2, put tires from an 09 trk on as test. Dealer called me said that my truck drove out exactly like the 09. nobody has been able to diagnose the problem even though the techs. have also noticed the vibration.Also have had the rear driveshaft replaced.To me the vibration is felt in the seats and also slightly at the steering wheel.after a depression in the road the "bounce" is more pronounced and then fades away. Any help in fixes?? 
|
- #88 of 90
-
Re: New Tacoma driveline vibration! [sergeante6]
by sergeante6
-
Jan 31, 2009 (12:44 pm)
-
|
|
Replying to: sergeante6 (Nov 17, 2008 11:44 am)
Finally got my drivetrain vibration figured out and taken care of by Ft. Myer's Toyota at no cost. Seems that the universal joint was bad and it came under warranty limits so I was in and out of my dealership in an hour and a half after pigging out on sub sandwiches and coffee that they provide for all waiting room customers. Vibration is totally gone.  Didn't need new mount, or tires. And the price was right.
|
- #89 of 90
-
Re: New Tacoma driveline vibration! [will39]
by okie147
-
Apr 07, 2009 (5:18 am)
-
|
|
Replying to: will39 (Nov 16, 2008 7:28 am)
theres no way that ur motor mounts are whats causing the problem, if they were loose yes theyd cause a shimmy but only when u pin it. its a toyota the mounts arent the problem, its in the driveshaft, ur U - joints, hanger bearings, ball joints ect..
|
- #90 of 90
-
Re: New Tacoma driveline vibration! [brepei]
by okie147
-
Apr 07, 2009 (5:24 am)
-
|
|
Replying to: brepei (Nov 20, 2008 11:25 am)
dont listen to the motor mount guy thats a bunch of bullshit! ive owned every year toyota there is and toyota has just got cheaper over the years, my 91 pickup killed my 97 tacoma and i had a 85 that was better then both of these trucks although the 91 pickup never let me down even with 22" rims and i put over 100 000 km on them even on shitty roads. ur problems in a drive shaft,cv,u-joint,ect. somehting along those lines, not motor mounts and if u think it is just open your hood pull the throttle and watch your engine ull see in a second. i had a 97 all it was was a hanger bearing i thought i had to redo my whole front end the shimmy was so ugly. just another piece of mind to whoever wants to read
this
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups 
