You are here:
Forums
Vans & Minivans
Nissan Quest
Nissan Quest Instrument Panel

17 messages, Last post on Jul 01, 2008 at 10:27 PM
You are in the Nissan Quest Forum. Your Host is Karens
|
Replying to: smile100 (May 10, 2008 5:07 pm) In addition to the three wiring harnesses connected to the instrument cluster, I also had to unclip and remove the PRNDL indicator at the bottom of the cluster. My idle rev is a bit high, either because the shop that replaced my plugs and distributor didn't set it right or because I moved the gauge faceplate too far out of position when I eased it away from the shaft and reglued it. I'm guessing the latter. I'll try to organize the pics soon and post them in a Guide. Thanks again Ebivens! Steve, visiting host |
|
|
I got around to posting the pics in a Guide: Fixing a Stuck Tach in a Nissan Quest I have additional photos - give a shout if you want to see them, but the ones in the Guide about cover it. It's a lot easier tackling something like this when your car is almost a decade old and has 125,000 miles on it. |
|
You are here:
Forums
Vans & Minivans
Nissan Quest
Nissan Quest Instrument Panel
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Nissan Quest



Browse by Board
Browse by Topic
Today's Chats