You are here: Forums Vans & Minivans Nissan Quest Nissan Quest/Mercury Villager Electrical Problems

Nissan Quest/Mercury Villager Electrical Problems

72 messages,  Last post on Dec 01, 2009 at 4:37 AM

You are in the Nissan Quest Forum. Your Host is Karens

What is this discussion about? Nissan Quest, Mercury Villager, Electrical, Van

Messages Page 7 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

#55 of 72 2000 nissan quest head lights by 68hotrod Aug 08, 2008 (11:58 am)
bought car  new 2000 leftover in 2001 3 time brought car back to dealer for head light going out  3 times they said  they fixed something   last time was 2005  still having same problem spoke to regional supervisor  will not do anything  what do i do next they  want $ 350 to repair donot want to pay i  feel it should of been corrected the first 3 times
#56 of 72 Re: Disarm the Alarm of a 99Villager [hfamerikaner] by stil29 Aug 25, 2008 (5:47 pm)
Replying to: hfamerikaner (Mar 07, 2008 4:48 pm) Had the same issue. After putting the key in and out 6 times actually start the car instead of just acc. Then push any button on the transmitter. No problems now. Good luck.
#57 of 72 nissan quest 07 speedometer malfunction by xmas Sep 16, 2008 (9:28 am)
My nissan quest se 07 has had an internal failure in speedometer and advised I had to replace insturment cluster. Total cost 575.00. Since I have 59,000 miles it is not covered under waranty. I called nissan customer service to complain. I am waiting to hear back from regional director. Has anyone had this problem? I thought speedometers lasted alot longer than that.
#58 of 72 Re: Daytime running lights [efitzgerald] by zgrabo Sep 23, 2008 (4:47 am)
Replying to: efitzgerald (Aug 30, 2007 6:29 am) Hi I have exactly the same problem with my headlights and daytime running lights. Just wondering how you managed to fix it ?
#59 of 72 Villager 96 head lights problem by zgrabo Sep 25, 2008 (7:20 am)
I have the same proble as fitzgerald posted about year ago (2007). The daytime running lights come on sometimes and goes off some times? Also my dashboard high beams light says its "on" all the time when i turn my headlights on when clearly there not on. Any comments??? Just wondering "fitzgerald" how you manged to fix it? Replies to this message: junebug1701 (Sep 25, 2008 8:51 pm) efitzgerald (Oct 07, 2008 5:18 am) efitzgerald (Jan 07, 2009 6:17 am) efitzgerald (Apr 27, 2009 6:52 am)
#60 of 72 Re: Villager 96 head lights problem [zgrabo] by junebug1701 Sep 25, 2008 (8:51 pm)
Replying to: zgrabo (Sep 25, 2008 7:20 am) The Canadian Villager/Quest has a daytime running light module mounted on or near the passenger side strut mount under the hood. I have heard that if you take the module apart and touch up the solder joints it may fix the problem. Seems this board suffers from cold solder joints that eventually fail. Go to:   http://autos.groups.yahoo.com/group/villagerquest/   For lots of great information on this problem.   James
#61 of 72 Re: Villager 96 head lights problem [zgrabo] by efitzgerald Oct 07, 2008 (5:18 am)
Replying to: zgrabo (Sep 25, 2008 7:20 am) Hi I sold my villager as i refused to put any more good cash for bad worn vehicle.
#62 of 72 Re: Interior light issues [sk0r] by freedml Dec 03, 2008 (1:07 pm)
Replying to: sk0r (Nov 13, 2007 3:45 pm) did you ever figure this out? I have the same problem.
#63 of 72 Re: Villager 96 head lights problem [zgrabo] by efitzgerald Jan 07, 2009 (6:17 am)
Replying to: zgrabo (Sep 25, 2008 7:20 am) I sold my 98 villager and bought a 07 altima ..love it..good car
#64 of 72 Distributor Problem by dcracraft Mar 28, 2009 (5:15 pm)
My wifes van stalled and will not start. I replaced the coil, had the igniton control module test and even replaced the coil to dist. cap wire. Van still wouldn't start. So off came the dist. cap. Rotor and cap are maybe a month old. When we turn the motor over the rotor does not turn. If I grab the rotor, I can't turn it. Feels normal like.   My question is, does the timing belt have anything to do with the distributor turning, or does the dist. get ran by the camshaft or something else?   It seems to me that if the distributor wouldn't turn by turning over the motor, I would be able to turn the rotor really easy.   Any ideas? I know I'm gonna have to replace the distributor... Replies to this message: jedft (Apr 20, 2009 8:41 am)

Messages Page 7 of 8 1 2 3 4 5 6 7 8 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Vans & Minivans Nissan Quest Nissan Quest/Mercury Villager Electrical Problems