Sign In Join 



Mazda 3 Tire & Wheel Questions

269 messages,  Last post on Nov 28, 2009 at 11:26 AM

You are in the Mazda3 Forum. Your Host is pf_flyer

What is this discussion about? Mazda MAZDA3, Mazda MAZDASPEED MAZDA3, Tires, Wheels, Hatchback


Messages Page 26 of 28
1
...
22
23
24
25
26
27
28
Prev
Next
Last
Go To Msg #
Search This Discussion

#245 of 269
Re: 6000 miles and needs new front tires [shipo] by davedf
Aug 07, 2009 (12:41 pm)
Reply

Replying to: shipo (Aug 07, 2009 11:33 am)

but only 6000 miles???
#246 of 269
Re: 6000 miles and needs new front tires [davedf] by shipo
Aug 07, 2009 (1:02 pm)
Reply

Replying to: davedf (Aug 07, 2009 12:41 pm)

Yup, I've actually heard from some owners that have had to replace the front tires in even less distance than 6,000 miles.
#247 of 269
Re: 6000 miles and needs new front tires [shipo] by davedf
Aug 08, 2009 (10:55 am)
Reply

Replying to: shipo (Aug 07, 2009 1:02 pm)

ouch. has anyone be able to get Mazda or the tire company to warranty them or is that a lost cause?
#248 of 269
Re: 6000 miles and needs new front tires [davedf] by shipo
Aug 08, 2009 (1:17 pm)
Reply

Replying to: davedf (Aug 08, 2009 10:55 am)

Probably a lost cause, that said, if Goodyear was to come to your aid, they'd probably want to replace the worn out rubber with more of the same. The fact is, the Eagle RS-As are a piece of junk, and while a different size and grade of that tire may do well on police cars and such, it is totally inappropriate for the Mazda3. Do yourself a favor and buy a decent set of tires from either your favorite tire shop or from http://www.tirerack.com, and don't look back.
 
Best regards,
Shipo
#249 of 269
Re: 6000 miles and needs new front tires [shipo] by rbucc1
Aug 17, 2009 (12:06 pm)
Reply

Replying to: shipo (Aug 08, 2009 1:17 pm)

I've been disappointed with the tire on my 2006 M-3.
I complained to the dealer and they said the Alignment must be done annually, I had the alignment done twice and it was in-spec both times. I was told I needed to rotate the tires more, I followed the 7500 miles in the manual.
I put Kumhos on and did not rotate at all. Have about 25k miles on them. The fronts are wearing well. the backs are cupping on the inside, the specs call for too much positive camber and the shocks are probably not helping. The suspension is a weak part of the design in my opinion.
#250 of 269
Re: 6000 miles and needs new front tires [rbucc1] by shipo
Aug 18, 2009 (2:00 am)
Reply

Replying to: rbucc1 (Aug 17, 2009 12:06 pm)

"The suspension is a weak part of the design in my opinion."
 
That depends entirely upon your perspective. The suspension on the Mazda3 is tuned for handling (at the expense of some tire wear) and it shows as this car will easily run rings around the likes of a Civic at the track. That said, I've never heard of a FWD car that wouldn't cup the rear tires if they were never rotated, and that goes back to the dawn of the FWD revolution that took place back in the late 1970s and early 1980s.
 
Best regards,
Shipo
#251 of 269
Re: 6000 miles and needs new front tires [rbucc1] by autonomous
Aug 18, 2009 (11:21 am)
Reply

Replying to: rbucc1 (Aug 17, 2009 12:06 pm)

put Kumhos on and did not rotate at all. Have about 25k miles ... the backs are cupping on the inside
Why aren't you having your tires rotated?
#252 of 269
2008 Mazda3 i touring 16" alloy wheel question by frankchen009
Aug 25, 2009 (4:26 pm)
Reply
Hi,
 
Does anybody know what is the material used for the wheel of this vehicle? Aluminum or magnesium? I plan to use the all wheel cleaner from Meguinar's. But the direction says don't use it on magnesium wheels. Thank you.
#253 of 269
Re: 2008 Mazda3 i touring 16" alloy wheel question [frankchen009] by roadburner
Aug 26, 2009 (10:10 am)
Reply

Replying to: frankchen009 (Aug 25, 2009 4:26 pm)

I use several Meguiars products, but Eagle One makes the best wheel cleaner.
#254 of 269
Re: 2008 Mazda3 i touring 16" alloy wheel question [frankchen009] by frankchen009
Aug 27, 2009 (7:33 am)
Reply

Replying to: frankchen009 (Aug 25, 2009 4:26 pm)

OK, I will answer this question by myself. Based on the manual, the wheel is aluminum alloy wheel.

Messages Page 26 of 28
1
...
22
23
24
25
26
27
28
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement