You are here: Forums Pickups Ford Ranger Ford Ranger 4x4 Problems

Ford Ranger 4x4 Problems

62 messages,  Last post on Aug 11, 2008 at 12:38 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 2 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

#9 of 62 Re: 1995 Ranger 4x4: wont engage 4Low/4High [pvolc15] by rapprj Jun 04, 2007 (4:15 pm)
Replying to: pvolc15 (Jan 16, 2007 12:33 pm) My 1998 Ford Ranger 4 liter auto with electronic shift on the fly seems to not be shifting into high or low 4wd. The dash light indicates 4 high but not low. I read the post about solenoid but I am wondering if it could be a fuse problem before the solenoid. Any help appreciated.
#10 of 62 93 Ranger 4x4 will not shift into 4hior4lo by lesroc3 Mar 12, 2007 (5:13 am)
#11 of 62 93 Ranger 4x4 will not shift into 4hior4lo by lesroc3 Mar 11, 2007 (7:48 pm)
I have a 93 Ranger 4x4 3.0 5 speed that will not shift into any 4x4 function. I have changed the selector button, shift control module. There is power to the selector buttons on one side of the switch but none on the other when activated. The fuses are good. Does anyone else know anything about them? Replies to this message: bolivar (Mar 12, 2007 1:37 am) pinwilly (Mar 12, 2007 5:13 am)
#12 of 62 Re: 93 Ranger 4x4 will not shift into 4hior4lo [lesroc3] by bolivar Mar 12, 2007 (1:37 am)
Replying to: lesroc3 (Mar 11, 2007 7:48 pm) I really don't know anything about 4x4, but I think the Rangers get gummed up inside and don't allow the gears to move around and engage. Replies to this message: pinwilly (Mar 12, 2007 5:13 am)
#13 of 62 Re: 93 Ranger 4x4 will not shift into 4hior4lo [bolivar] by pinwilly Mar 12, 2007 (5:13 am)
Replying to: bolivar (Mar 12, 2007 1:37 am) The hydrolic hubs go bad i recommend getting manual hubs their cheaper and wont go bad.
#14 of 62 4x4 problem with my Ranger by jujitsuthor Sep 08, 2007 (6:26 pm)
I have a 2001 Ranger EDGE, 4.0 liter engine, 4-Speed 4x4 Auto with about 106,000 miles on it. My 4x4 isn't working.   I flip the switch to 4-High, and the light switches to 4-High, but no power to my front wheels. Stop the truck, put it in neutral, flip it to 4-Low, and it switches over. I can feel the power difference because it gears lower, but still no power to the front wheels.   First time I found this out I was off-roading and got stuck in some sand. My roommate was with me and noticed that my rear wheels were kicking up all kinds of sand but my front wheels weren't moving at all, even though I had supposedly had it in 4-High the whole time. Any thoughts? A friend who's a mechanic said he's almost positive it's the hubs, and the local Ford dealership says they can replace the hubs for about $300 but I need to make sure before I spend the money. Totally appreciate any help you guys can give!
#15 of 62 nonworking 4x4 by ghoghunter Sep 18, 2007 (6:00 pm)
hello, i have a 99 ranger. it is soppose to be four wheel drive .i cant get the front wheels to lock in. has any one else had this problem? thanks Replies to this message: spyac3 (Dec 05, 2007 9:20 am)
#16 of 62 my 1998 3.0 manual, is stuck in 4x4low by cessna180 Mar 12, 2007 (6:19 pm)
#17 of 62 my 1998 3.0 manual, is stuck in 4x4low by cessna180 Mar 11, 2007 (12:10 pm)
switched to 4x4 low last night tried to switch back and it wont, stays lit up 4x4low even when knob is on 2high or 4high???help! Replies to this message: cessna180 (Mar 12, 2007 6:19 pm) ncherry (Aug 11, 2008 12:38 pm) remy3 (Nov 20, 2007 2:27 pm)
#18 of 62 Re: my 1998 3.0 manual, is stuck in 4x4low [cessna180] by cessna180 Mar 12, 2007 (6:19 pm)
Replying to: cessna180 (Mar 11, 2007 12:10 pm) turns out a fuse # 28 was bad bought sevice manuel easy fix! Replies to this message: ncherry (Aug 11, 2008 12:38 pm)

Messages Page 2 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger 4x4 Problems