You are here: Forums Pickups Ford Ranger Ford Ranger 4x4 Problems

Ford Ranger 4x4 Problems

123 messages,  Last post on Nov 30, 2009 at 2:18 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 8 of 13 1 ... 5 6 7 8 9 10 11 ... 13 Prev Next Last

Go To Msg # Search This Discussion

#68 of 123 '01 4wd problem by el_mn Nov 10, 2008 (9:14 pm)
I have a 01 4 liter automatic. I just took it out of storage a couple weeks ago (stored for the summer) and learned the hard way my 4wd isn't working. I turn the switch and nothing happens... no light comes on, no click in my dash. Possible bad switch or relay??? Checked all the fuses and they were all good. More crap weather is coming this week. Any help would be greatly appreciated. Replies to this message: kevin97116 (Nov 11, 2008 11:31 am) brucelinc (Nov 11, 2008 2:13 pm) el_mn (Nov 12, 2008 2:08 pm)
#69 of 123 Re: '01 4wd problem by kevin97116 Nov 11, 2008 (11:31 am)
Replying to: el_mn (Nov 10, 2008 9:14 pm) When I was having 4x4 shifting issues and was looking for possible fixes (mine ended up being electric hubs, replaced with manuals) I was told that it's common to have the shifting mechanism seize up from grit etc, especially when not used for a period of time. I was told to shift into 4x4 and back out every month of so just to keep the stuff sliding properly. I never ended up having to take my transfer case apart so I can't help much there, but perhaps someone else can tell you what to look for there.   good luck, Kevin
#70 of 123 Re: '01 4wd problem [el_mn] by brucelinc Nov 11, 2008 (2:13 pm)
Replying to: el_mn (Nov 10, 2008 9:14 pm) The 4X4 control module is a pretty common problem on these. Do a search for "Ranger 4X4 control module" and you will find lots of information.
#71 of 123 Re: '01 4wd problem [el_mn] by el_mn Nov 12, 2008 (2:08 pm)
Replying to: el_mn (Nov 10, 2008 9:14 pm) Thanks a ton for all the help guys. I'm pretty positive it's the control module. After doing more research it said they are notorious for going out on 01-03 ford models, especially when you charge or replace the battery. What did i do right before i took it out of storage, had to jump the battery then replace it with a new one... so it must have fried it. My mechanic buddy came over with his plug in computer and the control module was the only thing he couldn't communicate with, so I'm pretty sure that's it. Thanks again you guys saved me a bunch of money on labor fees.
#72 of 123 4x4 not engageing by ranger4x4 Nov 16, 2008 (11:42 am)
i have a 97' ford ranger. the electronc swich engages the tranfercase but does not go to the axle and the hubs dont lock in. the fuses are good. what can it be? i was thinking the vacume lines?
#73 of 123 auto hubs bad? by ranger4x4 Nov 16, 2008 (4:48 pm)
i have a 97' ford ranger. the electronc swich engages the tranfercase, i can feel it go to 4x4 low, the hubs dont lock in. the fuses are good. what can it be? i was thinking the vacume lines?
#74 of 123 4x4 auto hubs not working? by ranger4x4 Nov 16, 2008 (4:49 pm)
i have a 97' ford ranger. the electronc swich engages the tranfercase but does not go to the axle and the hubs dont lock in. the fuses are good. what can it be? i was thinking the vacume lines?
#75 of 123 Re: 2001 3L 4x4 won't go into 4 wheel drive [jtv3] by mmcfee2 Nov 18, 2008 (5:43 am)
Replying to: jtv3 (Sep 17, 2008 3:27 am) Jim, Did you ever solve your problem? I am experiencing the same. I have a 2001 4.0L 4x4. Same as you, 4x4 stopped working, I pulled the fuse, it was good so I re-inserted and 4x4 started working again. Now, a few months later, we get our first snow, and it's not working again. The fuse out/in does not fix the problem this time. I'm suspecting the 4x4 control module under the passenger's kickplate? When I engage the 4x4 swtich, no click, no lights, nothing......Just wondering if you got to the root of this problem and what your fix was...Thanks, Mark
#76 of 123 by myford1 Nov 18, 2008 (5:35 pm)
i have a 1988 ford ranger xlt 4x4 that has the touch drive 4 wheel drive well i used the 4 wheel drive today in low range and then when i got back onto the road i tried to turn it off and it won't disengage it is stuck in 4x4 low range so far i have pounded on the cylonoid and i have disconnected the battery to try and disengage it and nothing has worked any ideas of how to get it out of 4 wheel drive would be appreciated thanks
#77 of 123 4x4 problem by cbinkcak Nov 27, 2008 (7:41 pm)
Hello,I put manual hub on a 1997 ranger last year.   Now it will not go into 4 wheel drive(hi or lo).The lights on the dash light up when it is started,they work when you turn the switch from 2 wheel drive to 4 hi and lo,but the eletric shift motor doesn't turn. I installed a new electric shift motor,but it doesn't do anything either.There was a wire from the transfer case to the old shift motor.I stripped the wire on the plug going up thru the floor (black I think) and still nothing.   What else can I try now.   Thanks for any help.

Messages Page 8 of 13 1 ... 5 6 7 8 9 10 11 ... 13 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger 4x4 Problems