You have saved this page | See all saved pages
Ford Ranger 4x4 Problems
208 messages, Last post on Feb 28, 2013 at 5:49 AM
You are in the Ford Ranger Forum.- Your Host is kcram
What is this discussion about? Ford Ranger, Truck
#204 of 208 Re: Ford Ranger 4X4 Problems [rfaris81] by cschwartz2
Dec 21, 2012 (11:01 am)
Replying to: rfaris81 (Dec 21, 2012 10:44 am)
My hub was humming, so I had Ford replace it when they were replacing my timing chain guides. I think it was about 300.00 for the part and them to do it. Not too bad, cuz Autozone wanted almost that much for a new hub... Good luck! Ranger Dangers bring Ranger problems. Oh but once I got timing chain guides fixed and new hub my Ranger is a champ again(knock on wood) and went mudding in October through the alleghany mtns.!!!! Ranger Danger impressed me with what he went through!!
#205 of 208 Re: 4x4 problem with my Ranger [jujitsuthor] by 48ford
Jan 12, 2013 (7:19 pm)
Replying to: jujitsuthor (Sep 08, 2007 6:26 pm)
on my ranger 4hi and 4lo lights would come on and i could hear it click but no power i took the right hub off and manually put it in 4low it worked until i turn truck off it went back to 2wd i pulled both front tires off and found that the vaccun lines going to the hubs were dry rotted and cracked replaced tubes and now 4hi works great still no 4lo but i will figure it out soon. so check all your vaccum lines for cracks and dry rot if you replace one do both be safe
#206 of 208 Re: probs with my 4x4 [jegs74] by johnnynutz57
Feb 22, 2013 (12:29 am)
Replying to: jegs74 (Dec 05, 2011 7:01 pm)
I have 98 Ford ranger and the same thing just happen to me won't shift in 4 wheel drive and the 4HI & 4LOW indicator flash 4or 5 time then stop then when i trun off the truck and restart dose the same thing didn't get a chance to run any test yet last year, in 2012 truck would't go in to 4 wheel drive so change out hubs to manual worked find and then put in new shifter box that goes to back of transfer case(forgot what that was call) any clue?
#207 of 208 Re: probs with my 4x4 [jegs74] by 6_7ford
Feb 27, 2013 (2:10 pm)
Replying to: jegs74 (Dec 05, 2011 7:01 pm)
I have 98 Ford Ranger and am having the same problem that you described. I have checked the cab switch and transfer case motor they have both checked out good. I was hoping that you have found the problem and could help me out. Thanks.
- cschwartz2 (Feb 28, 2013 5:49 am)
Replies to this message:
#208 of 208 Re: probs with my 4x4 [6_7ford] by cschwartz2
Feb 28, 2013 (5:49 am)
Replying to: 6_7ford (Feb 27, 2013 2:10 pm)
My issue was the 4x4 control module(small black box) located on the passenger side under the kick panel(plastic cover) 200 dollars, 4 screws and 2 connectors and 4x4 worked great again, knock on wood... Good luck
To POST a message, please
Sign In.
Advertisement
Most Popular in Forums
Search Forums
Enter Keyword(s):
Learn More, Do More
Edmunds Community
Advertisement