You are here:
Forums
Pickups
Ford Ranger
Ford Ranger 4x4 Problems

122 messages, Last post on Nov 22, 2009 at 12:15 PM
You are in the Ford Ranger Forum. Your Host is kcram
|
Replying to: lesroc3 (Mar 11, 2007 6:48 pm)
|
|
|
Replying to: bolivar (Mar 12, 2007 12:37 am) |
|
|
|
|
I have a 2001 Ranger EDGE, 4.0 liter engine, 4-Speed 4x4 Auto with about 106,000 miles on it. My 4x4 isn't working. I flip the switch to 4-High, and the light switches to 4-High, but no power to my front wheels. Stop the truck, put it in neutral, flip it to 4-Low, and it switches over. I can feel the power difference because it gears lower, but still no power to the front wheels. First time I found this out I was off-roading and got stuck in some sand. My roommate was with me and noticed that my rear wheels were kicking up all kinds of sand but my front wheels weren't moving at all, even though I had supposedly had it in 4-High the whole time. Any thoughts? A friend who's a mechanic said he's almost positive it's the hubs, and the local Ford dealership says they can replace the hubs for about $300 but I need to make sure before I spend the money. Totally appreciate any help you guys can give! |
|
|
|
hello, i have a 99 ranger. it is soppose to be four wheel drive .i cant get the front wheels to lock in. has any one else had this problem? thanks
|
|
switched to 4x4 low last night tried to switch back and it wont, stays lit up 4x4low even when knob is on 2high or 4high???help!
|
|
|
Replying to: cessna180 (Mar 11, 2007 11:10 am)
|
|
|
Replying to: cessna180 (Mar 11, 2007 11:10 am) |
|
| 4 wheel works lights do not work on dash box behind drivers seat clicks red light keeps going off and on is light on box suppost to be on always.i have changed motor on trans case new i have changed switches on dash used i did see them working in other truck i dont want to just keep changing parts been searching for cause all over net please any help would be helpful | |
| Although I have had problems each year with the 4x4 in my 1994 Ranger it is dead for good this time. 300,000 + miles on it so I do not want to spend any money to repair it. With winter coming does anyone know a sufficient amount of weight to add to bed for traction in snow? My son drives it now and I don't want to see him get stuck this winter. I purchased six 50 pound bags of sand and placed them in the bed over the rear axle, but I'm not sure if I should add more weight. He doesn't drive far so I don't mind the added weight for gas consumption. Has anyone ever added weight to a 2 wheel drive Ranger? | |
You are here:
Forums
Pickups
Ford Ranger
Ford Ranger 4x4 Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Ford Ranger



Browse by Board
Browse by Topic
Today's Chats