30 messages,
Last post on Nov 26, 2011 at 7:41 PM
You are in the
Ford Ranger Forum.
What is this discussion about?
Ford Ranger, Ford, Truck
#23 of 30 Re: interchangeable seats [xramarx]
by pricostrive
Nov 10, 2010 (8:17 pm)
look as far as the dome light all you have to do is spray ALOT of WD40 into the door latch. that is where the sensor is and it has worked for me and my ranger comrades.
Nov 19, 2010 (5:42 am)
does any one know any good site to look at for finding stuff to redo the inside of my truck my self
Jul 03, 2011 (6:20 pm)
i have a 1999 ford ranger, and had this problem, i went to the parts store and the guy tried to get me to buy a sensor, i was then going to adjust the latch the door hooks onto, instead i heard about WD40 working, i shot it in there and sure enough it worked like a champ, no problems since!
Jul 03, 2011 (6:23 pm)
I have a 1999 Ford ranger with the 60/40 seat, the drivers side is in rough shape as far as the reclining ability goes, the fabric is good, is there any way to fix it so i can actually adjust it and not pull the "low rider" Bs that i have been for a couple of days, any advice would greatly help!
#27 of 30 seat belts
by jorr2
Sep 21, 2011 (6:53 pm)
#28 of 30 seat belts
by jorr2
Sep 21, 2011 (6:53 pm)
My safety belt passenger side 2004 ranger 4x4 will not engage (click in). any idea of the cause?
#29 of 30 Re: seat belts [jorr2]
by bolivar
Sep 25, 2011 (1:37 am)
Your kid pushed a penny into it.
Nov 26, 2011 (7:41 pm)
I Have a 97 ranger and need a bench seat do you still have it?
we bought a 60/40 seats grey they do not fit