Ask the Car People.SM


Ford Ranger Seats and Interior

30 messages,  Last post on Nov 26, 2011 at 7:41 PM

You are in the Ford Ranger Forum.

What is this discussion about? Ford Ranger, Ford, Truck

Messages Page 3 of 4

#13 of 30 Re: Power seats for Ranger - what years? [bolivar] by suec56

Mar 29, 2008 (10:12 am)

Replying to: bolivar (Mar 29, 2008 12:10 am)
I wish. My 95 doesn't have much except a/c. I bought it 18 months ago and it's nice looking and runs well but I want more power and more bells and whistles. And I REALLY miss having cruise control. I didn't realize how much I was going to miss that.
 
I have looked at the Ford Ranger sales brochures that I bought on eBay and as far as I can tell, 1998 was the last year. Anyone have a newer one with factory power seats? Anyone ever installed *used* power seats in a truck that didn't originally come with them?
 
Sue

#15 of 30 1998 Ranger w/ Passenger Seat Stuck in Upright Position by montana79

May 14, 2008 (4:41 pm)

The handle that controls reclining on the passenger seat in my Ranger broke off and the seat is stuck in the upright position. Any ideas on a quick fix to at least get the seat to recline back to a more comfortable position?
 
Thanks in advance for any advice!!

#16 of 30 ford ranger dash and cab by mkosten

Jun 29, 2008 (4:12 pm)

i am trying to take the dash out of my 1999 ford ranger and im having problems with the wires. ive unhooked them all over the place and still cant get them all out without cutting them is there an easier way of doing it with having to run all the wires when i put the new dash in? i have never done anything like this before i am notg sure if i will be able to put it back together again once i get it all out. kinda sucks. and does anyone know if a 1995 cab will fit on a 1999 truck frame?

#17 of 30 Driver's Side Seat Removal by pongopachu

Aug 26, 2008 (10:32 am)

Hello all. I have a 2002 Ranger and I need to remove the driver's side seat, since I broke the reclining bolt. Does anyone know what size Torx bit I need? Also, does anyone know if the seat is connected to the airbag system?
 
Thanks!!!!

#18 of 30 want to pimp my ride by sisaminah

Sep 14, 2008 (3:42 pm)

I'm ready to spruce up the interior in my 1996 ford ranger splash. I want to replace upholstery and the seats. Anybody have experience with this? Where is a good place in the Mobile, AL area to have it done? How much will it cost?

#19 of 30 Replacement Seat 1995 Ranger by paulcull

Mar 02, 2010 (5:44 pm)

#20 of 30 Replacement Seat 1995 Ranger by paulcull

Mar 02, 2010 (5:44 pm)

Has anyone replaced the 60/40 seat in the 95 or similar Ranger? I would like to locate a grey seat in good condition, any suggestions?

#21 of 30 interchangeable seats by xramarx

Mar 21, 2010 (1:19 pm)

I have a 1996 Ranger regular cab and it has a bench seat. I would like to know if I can get a 60/40 seat from any other years to put in easily? Also, has anyone figured out why the dome light stays on all the time. I am sure many others have had this problem. Also the buzzer stays on when I put the key in the accessory position?

#22 of 30 Re: interchangeable seats [xramarx] by bolivar

Mar 22, 2010 (2:05 am)

Replying to: xramarx (Mar 21, 2010 1:19 pm)
The 'door open' switches are bad.
 
You have to take the door panels off. They are not on the hinges, they are on the locking/door closing mechanism, up on the inside rear. Take the panel off and find the wire. Replace the switch or clean it up with WD40, etc.
 
You might have one or both door switches bad.

Messages Page 3 of 4

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement