30 messages,
Last post on Nov 26, 2011 at 7:41 PM
You are in the
Ford Ranger Forum.
What is this discussion about?
Ford Ranger, Ford, Truck
#11 of 30 Re: Power seats for Ranger - what years? [bolivar]
by suec56
Mar 28, 2008 (8:21 pm)
I'm going to replace the 1995 truck with a newer one and was hoping to find one with power seats.
#12 of 30 Re: Power seats for Ranger - what years? [suec56]
by bolivar
Mar 29, 2008 (12:10 am)
Well how about that? I went to www.ford.com and selected Vehicles, then Ranger, then Options, and....... they don't have a seat with power options. Only a 'manual lumbar' feature.
Dumb, dumb, dumb.
I have no idea when they stopped power seats in the Range, and know of no easy to find out.
Maybe people reading on here will say - "I've got a 19xx or 20xx and it has power seats". This could give you an idea of when they were available.
As I said, my 1994 had them. Apparently your 1995, which you are wanting to upgrade, has them.
Good look on getting the info you need.
#13 of 30 Re: Power seats for Ranger - what years? [bolivar]
by suec56
Mar 29, 2008 (10:12 am)
I wish. My 95 doesn't have much except a/c. I bought it 18 months ago and it's nice looking and runs well but I want more power and more bells and whistles. And I REALLY miss having cruise control. I didn't realize how much I was going to miss that.
I have looked at the Ford Ranger sales brochures that I bought on eBay and as far as I can tell, 1998 was the last year. Anyone have a newer one with factory power seats? Anyone ever installed *used* power seats in a truck that didn't originally come with them?
Sue
#15 of 30 1998 Ranger w/ Passenger Seat Stuck in Upright Position
by montana79
May 14, 2008 (4:41 pm)
The handle that controls reclining on the passenger seat in my Ranger broke off and the seat is stuck in the upright position. Any ideas on a quick fix to at least get the seat to recline back to a more comfortable position?
Thanks in advance for any advice!!
#16 of 30 ford ranger dash and cab
by mkosten
Jun 29, 2008 (4:12 pm)
i am trying to take the dash out of my 1999 ford ranger and im having problems with the wires. ive unhooked them all over the place and still cant get them all out without cutting them is there an easier way of doing it with having to run all the wires when i put the new dash in? i have never done anything like this before i am notg sure if i will be able to put it back together again once i get it all out. kinda sucks. and does anyone know if a 1995 cab will fit on a 1999 truck frame?
#17 of 30 Driver's Side Seat Removal
by pongopachu
Aug 26, 2008 (10:32 am)
Hello all. I have a 2002 Ranger and I need to remove the driver's side seat, since I broke the reclining bolt. Does anyone know what size Torx bit I need? Also, does anyone know if the seat is connected to the airbag system?
Thanks!!!!
#18 of 30 want to pimp my ride
by sisaminah
Sep 14, 2008 (3:42 pm)
I'm ready to spruce up the interior in my 1996 ford ranger splash. I want to replace upholstery and the seats. Anybody have experience with this? Where is a good place in the Mobile, AL area to have it done? How much will it cost?
#19 of 30 Replacement Seat 1995 Ranger
by paulcull
Mar 02, 2010 (5:44 pm)
#20 of 30 Replacement Seat 1995 Ranger
by paulcull
Mar 02, 2010 (5:44 pm)
Has anyone replaced the 60/40 seat in the 95 or similar Ranger? I would like to locate a grey seat in good condition, any suggestions?