You are here: Forums Pickups Ford Ranger Ford Ranger Seats and Interior

Ford Ranger Seats and Interior

18 messages,  Last post on Sep 14, 2008 at 2:42 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Ford, Truck

Messages Page 1 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#1 of 18 front seat tilt by avery2 Jan 16, 2007 (10:59 am)
i have an 04 ranger and front seat will not tilt to allow access to the rear of cab.Any ideas.                        thanks Replies to this message: fordtech (Jan 17, 2007 7:11 pm)
#2 of 18 Re: front seat tilt [avery2] by fordtech Jan 17, 2007 (7:11 pm)
Replying to: avery2 (Jan 16, 2007 10:59 am) Yeah its an 04 so you should still be under warranty, unless you drive over 1000mi/mo.. If its still under warranty take it back to the dealer and let them fix or replace your tilt system like they are supposed to do..
#3 of 18 ranger seats by chobson May 21, 2007 (5:41 pm)
#4 of 18 ranger seats by chobson May 21, 2007 (5:41 pm)
anybody out there know what year seats are interchangable. I have a 97 and the seats are real busted, want to put new ones in, however i dont know what years would also fit. thanks.
#5 of 18 Interior Disassembly by amarcey Jul 16, 2007 (12:49 pm)
#6 of 18 Interior Disassembly by amarcey Jun 06, 2007 (11:11 am)
I purchased a '96 Ranger, but previous owner used carpet and upholstery cleaner crap that reeks. Will not air out. (its bad. Thought I'd be able to get it out. Wrong).   Seriously considering a new floor rug and having seats & headliner steam cleaned.   Anyone know how easy/ difficult it would be to get seats out to get rug out...I'm thinking seat belts might be challenging. Any experience anyone? Replies to this message: skeeter48348 (Jun 30, 2007 3:24 pm) amarcey (Jul 16, 2007 12:48 pm)
#7 of 18 Re: Interior Disassembly [amarcey] by skeeter48348 Jun 30, 2007 (3:24 pm)
Replying to: amarcey (Jun 06, 2007 11:11 am) Piece of cake. Seats just unbolt and lift out. Seat belts are easy as well but you need a good sized torx wrench. The trim panels are held with plastic pop pins and the heads may pop off when you remove them but really the carpet removal is perhaps a 30 / 45 min job. Replies to this message: amarcey (Jul 16, 2007 12:48 pm)
#8 of 18 Re: Interior Disassembly [skeeter48348] by amarcey Jul 16, 2007 (12:48 pm)
Replying to: skeeter48348 (Jun 30, 2007 3:24 pm) Hi Skeeter48348~ Thanks for the info about Ford Ranger interior dissassembly. But what about the headliner? Any experience/ advice about removing and replacing?
#9 of 18 Power seats for Ranger - what years? by suec56 Jan 30, 2008 (7:42 am)
I'm looking to upgrade from my 1995 Ford Ranger and would really like to get the power seat option. As far as I can tell by the sales brochures, that ended in 1998. Can anyone tell me specifically which years have the option of a power driver's seat?   Thanks   Sue Replies to this message: bolivar (Jan 30, 2008 12:54 pm) suec56 (Mar 28, 2008 7:21 pm) bolivar (Mar 28, 2008 11:10 pm) and 1 more...
#10 of 18 Re: Power seats for Ranger - what years? [suec56] by bolivar Jan 30, 2008 (12:54 pm)
Replying to: suec56 (Jan 30, 2008 7:42 am) I really don't understand why you need this info. You are going to have to go to a salvage and ask them if they have power seats for a Ranger. You already have seem to found that the year must be pre-1998. (Are you sure you can't get power seats in a later Ranger? This would seem to be a pretty basic option, and I can't see Ford dis-continuing such a thing.)   On my 1994 STX Ranger it had Power Driver seat, with blow up side and back bolsters. The passenger seat was not power, but did have the side and back bolsters. Replies to this message: suec56 (Mar 28, 2008 7:21 pm) bolivar (Mar 28, 2008 11:10 pm) suec56 (Mar 29, 2008 9:12 am)

Messages Page 1 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger Seats and Interior