Ask the Car People.SM


Ford Ranger Seats and Interior

30 messages,  Last post on Nov 26, 2011 at 7:41 PM

You are in the Ford Ranger Forum.

What is this discussion about? Ford Ranger, Ford, Truck

Messages Page 3 of 3

#21 of 30 interchangeable seats by xramarx

Mar 21, 2010 (1:19 pm)

I have a 1996 Ranger regular cab and it has a bench seat. I would like to know if I can get a 60/40 seat from any other years to put in easily? Also, has anyone figured out why the dome light stays on all the time. I am sure many others have had this problem. Also the buzzer stays on when I put the key in the accessory position?

#22 of 30 Re: interchangeable seats [xramarx] by bolivar

Mar 22, 2010 (2:05 am)

Replying to: xramarx (Mar 21, 2010 1:19 pm)
The 'door open' switches are bad.
 
You have to take the door panels off. They are not on the hinges, they are on the locking/door closing mechanism, up on the inside rear. Take the panel off and find the wire. Replace the switch or clean it up with WD40, etc.
 
You might have one or both door switches bad.

#23 of 30 Re: interchangeable seats [xramarx] by pricostrive

Nov 10, 2010 (8:17 pm)

Replying to: xramarx (Mar 21, 2010 1:19 pm)
look as far as the dome light all you have to do is spray ALOT of WD40 into the door latch. that is where the sensor is and it has worked for me and my ranger comrades.

#24 of 30 help by spazymagge

Nov 19, 2010 (5:42 am)

does any one know any good site to look at for finding stuff to redo the inside of my truck my self

#25 of 30 the fix by rangerdanger4

Jul 03, 2011 (6:20 pm)

i have a 1999 ford ranger, and had this problem, i went to the parts store and the guy tried to get me to buy a sensor, i was then going to adjust the latch the door hooks onto, instead i heard about WD40 working, i shot it in there and sure enough it worked like a champ, no problems since!

#26 of 30 Seat issues by rangerdanger4

Jul 03, 2011 (6:23 pm)

I have a 1999 Ford ranger with the 60/40 seat, the drivers side is in rough shape as far as the reclining ability goes, the fabric is good, is there any way to fix it so i can actually adjust it and not pull the "low rider" Bs that i have been for a couple of days, any advice would greatly help!

#27 of 30 seat belts by jorr2

Sep 21, 2011 (6:53 pm)

#28 of 30 seat belts by jorr2

Sep 21, 2011 (6:53 pm)

My safety belt passenger side 2004 ranger 4x4 will not engage (click in). any idea of the cause?

#29 of 30 Re: seat belts [jorr2] by bolivar

Sep 25, 2011 (1:37 am)

Replying to: jorr2 (Sep 21, 2011 6:53 pm)
Your kid pushed a penny into it.

#30 of 30 bench seat by qtwhitby

Nov 26, 2011 (7:41 pm)

I Have a 97 ranger and need a bench seat do you still have it?
we bought a 60/40 seats grey they do not fit

Messages Page 3 of 3

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement