Last post on Dec 16, 2010 at 7:03 PM
You are in the Ford Expedition
What is this discussion about?
Ford Expedition, Electrical, SUV
#11 of 13 service engion light
Oct 10, 2007 (7:09 pm)
I installed a cold air intake system on my 2000 expadition. My new intake air system only has one opening for a sensor, and I have two.The second was located near the end of the origonal air cleaner. I have had to unplug it or my engion will stall and die. What to do. I have noticed an increase in power and really dont want to installe the old air cleaner system.
#12 of 13 Re: expedition temp gauge while towing... [scubastevehere]
Dec 06, 2007 (12:00 pm)
Update...Replacing the radiator and hoses repaired this problem of overheating while towing...The new radiator was TWICE the capacity... maybe ford realized this was a problem and updated it...I had had one mechanic take temp readings all over the radiator to see if it was dissipating heat properly and the readings were good. However this wasn't a good enough test......The old radiator had a layer of stuff "set up like cement" inside it say'a the mechanic.. he was right NOW the heater doesn't get up to temp.. how much ya wanna bet , I need a new heater core for the same reasons...PS my butthead mechanic at the local ford dealer wrote on my first repair bill "the trailer is oversized for the vehicle" He couldn't be more wrong, he was just lazy and didn't want to spend the time troubleshooting properly....Maybe he wanted this on file so he wouldn't have to do warranty work on my ford rebuild.
#13 of 13 OVERHEATING PROBLEM HELP
Dec 16, 2010 (7:03 pm)
I have a 98 expedition 4.6 ,n I just had my heater core done my heat works great now , but now my trucks gauges will jump from cold to hot saying it"s over heating at the same time that happens my oil light comes on and my heat basically cooks u .... I had my friends husband look at it and he said it wasn't enough coolant , we put some in and that aint the problem .... HELP