Isuzu Trooper: Timing Belt Problem

16 messages, Last post on Nov 20, 2009 at 5:12 PM

You are in the Isuzu Trooper Forum. Your Hosts are steve_ & tidester

What is this discussion about? Isuzu Trooper, Engine, SUV

#13 of 16 Re: 1994 Trooper Timing Belt Replacement [wboomer61] by chaison Nov 14, 2008 (4:07 pm)
Replying to: wboomer61 (Oct 27, 2007 12:16 pm) well You need a long !/2" drive Breaker bar or at least a 24" craftsmen (strong one) and a pipe over it for leverage(mayb). I have a 32" I got from harbor freight. Use a small socket not a long deep one. Use a 14" pipe wrench tighten it up top lip inside of pulley bottom lip tight against outside of pulley lodge other end against frame or something very solid and pull lefty loosey righty tighty
#14 of 16 isuzu trooper 3.1 citation diesel by egyptgerry Mar 15, 2009 (11:04 am)
changed the cam belt but how do you turn off the warning light on the dashboard
#15 of 16 Re: Engine want start & there is oil on the outside of spark plug [geronimeaux] by brentb1 Mar 28, 2009 (10:51 am)
Replying to: geronimeaux (Jun 17, 2008 11:27 am) you need new grommets that go in the under side of the valve cover.that will stop the oil getting into the tubes
#16 of 16 Re: back fire/no power [changus02] by valentius Nov 20, 2009 (5:12 pm)
Replying to: changus02 (Oct 10, 2007 6:28 pm) That is due to bad spark plugs or cables, or maybe the O2 sensor too. Regards,