Last post on Dec 18, 2012 at 7:24 PM
You are in the Jeep Wrangler
What is this discussion about?
Jeep Wrangler, Jeep, Brakes, Engine, Suspension, SUV
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#155 of 229 Re: 2008 Jeep Wrangler Clutch Pops out of First Gear [flynlevel]
Oct 27, 2009 (5:32 pm)
My Jeep does the exact same thing when it's in first gear. I took it to a Jeep Service Center they drove it around and Nothing! They said that they couldn't find anything. Two days later it happened again. I have had manuals all my life this is fairly a new 2008 model. I don't know what to do. Maybe we should all write to Jeep there has to be some sort of recall.
#156 of 229 RE: Front end shaking
Oct 27, 2009 (7:19 pm)
Man, sure wish I had read this a few weeks ago. I just had the same problem, what a scary thing. I had a problem about a month ago, was stranded in Bakersfield for a night as they replaced a speed sensor when two lights came on my dash. Then two weeks later the shaking started. First thought it was the freeway then it happen a week later then a few days later of course when I was quite a ways from home. Found a Jeep dealer and they told me what it was but they didn't have the part. Said it was ok to drive home but take it to my home dealer ASAP. Did that and they did replace the steering stablizer. Now a week later my OBD light came on so its going back to the dealer again on Friday. I have a 2007 Wrangler Sahara 4-door. My third jeep but first wrangler. Never had any problems with my Cherokee's. Not too happy right now, only have 15,000 miles on it. Starting to wonder if this was a good choice or not being that I drive long distant alone alot and really need a dependable car. Not looking like this has been a problem that is being fixed. Any thoughts or anyone else changing their minds on this car?
Nov 08, 2009 (2:54 pm)
7500 miles and replaced the transfer case fluid with redline. But also just filled the tank and added the usual dose of redline to the gas. Just coincidence or what, I don't know but the rubicon is running better than ever. If it's the redline then I'll investigate the torque converter (for any aftermaket that will produce gains) and move the change all tranny fluid up on the list of things to do.
Nov 14, 2009 (11:53 am)
Just replaced 6 month old new style hood latches with the same part no listed in the tsb for $9. A few weeks ago traveled against the wind to OK and passing trucks had hood flutter. The next day again against a south wind, after better_half reclined to try and get some rest and while passing a truck, heard that horrible bang bang. Guess being an oldtimer was shocked but no pucker of the derriere.
Yesterday, bought the daystars from the four wheel parts store nearby. Ignored their instruction sheets to remove the latches and break apart in a vise. Just carefully hack sawed off the passenger side lower pin at the front and popped the rest of the pin out towards the back. New pin bigger than hole in the bracket. Called the store about return and they also had me call daystar. At the store I offered the clerk to see what I was telling them. Got my refund.
Several ideas on the net about these darn latches-just give us a normal hood like everybody else has had for years. Hood flutter on our previa and one of our e150 vans was cured by turning those stupid plastic or rubber hood stops.
Some say use the daystars (not for 09 or 10 yet), others use the cable tie over the weak rubber, and another says to remove the hood spring. Nobody ever posts why they did what they did. The spring wants to push up the hood the latch rubber bands want to hold it down and that little piece of rubber on the latch protects against hood metal meeting fender metal. I'll stick with the weak factory rubber, which might last longer, now that the hood spring is removed.
#159 of 229 JK Transmission, Torque Converter, Software
Nov 14, 2009 (12:41 pm)
Finally found good googled hits about the mopar tranny, tc, and software. Spent quite a bit of time this week trying to get answers for another issue that developed on this recent TX-OK sprint.
Trying to pass a truck (wish more people wouldn't ride the truck rear bumper but better yet pass that truck and quit riding along side them for miles), doing the 70 speed limit ( thankfully didn't have to respond to anybody that yes slow down and follow or take 10 miles by not exceeding the speed limit to pass a truck) punched the throttle and rpms go to 5500 then 5000 and nothing. What good was all that gas if the response was that bad. Did it drop to 2nd? Did the pressure in the tc get limited and wasted, did the clutch pack burn up, did the sw fail to unlock and and let the rpms pull with fourth at that speed was 3rd even necessary and 2nd would've been totally stupid.
Years ago a post here and possibly by a woman seemed to be dismissed about not being able to back uphill with her jeep. I tried doing just that in the crd with the 545 after that post. I don't like to dismiss the internet as a bunch of idiots and that don't believe those internet idiots. Dex-cool, 5 speed automatics, etc.
Posts here and elsewhere talk about this issue. In our 06 h3 at about 60 with a punch ours, confirmed by dealer heavy line mechanic thru obd, downshifts to 2nd per design - that is baloney design give me the old tranny from that deuce and a quarter or that 472 deville and keep your modern learning garbage.
Mentioning that to a parts store manager his first thought was torque converter. Lost members looked to suncoast and trans go to fix their CRD. Never did that with our crd. modern diesel ptooey as the say about gassers. Think I remember a post from Caribou sometime back that Europe was loosing its' love affair with modern diesels - fuel, high pressure pumps, or cheap parts - why don't know.
Talked to a famous Ft. Worth high performance shop owner who said it wasn't the torque converter or transmission and that I didn't know what it was (and presumedly what I was talking about). Got their tranny rebuilder's name west of Ft. Worth. Told him my story including the crd getting the wrangler diesel tc - all you get is stronger spring for the clutch pack. lost members still go to suncoast. He said it wasn't my tc and goodby I have another call coming in. And keep getting that it is a brick going down the highway-baloney again. Both conversion vans e-150's one with the 351 and one with the 5.4 (speed limited), when at speed took that throttle to keep up with the herd.
#160 of 229 Re: 2007 Wrangler Soft Top Issues [motherofdomi]
Jan 29, 2010 (10:14 am)
Same problem and need help in what to do.
#161 of 229 Framless wipers for jeep wrangler jk
Feb 14, 2010 (6:46 am)
Found the newer-style frameless wiper blades for the JK generation of the Jeep Wrangler. After doing a lot of searching I found that the 'Trico Neoform Beam Blades' have a option that fits the Jeep wiper arms and the JK windshield. They're not 15" but they're 14" (the 1/2" difference on each side isn't noticable). They wipe excellent and are quiet - like them better than the old-school framed wipers. Came with removal and replacement instructions - easy install. Got them online.
#162 of 229 Re: 2008 Jeep Wrangler Clutch Pops out of First Gear [postalchick]
Feb 16, 2010 (2:27 pm)
I have a Jeep Wrangler 2008 and have had the same problem. It started about 35,000 miles so I guess I consider myself lucky?
I have had endless conversations with Chrysler Senior Resolutions and my local dealer. They have replaced my transmission twice and have now determined that there is a synchronization problem between 1st and 2nd. As of the writing of this they are creating a technical service bulletin for the problem which should be out in the next 2 weeks. They assure me that the steps are being taken to make the parts to solve this problem, they don't exist at this point. As soon as the parts are manufactured they believe it will solve the problem.
Keep your figures crossed. I'm remaining optimistic this will work.
#163 of 229 RE: Front end shaking [huskycountry]
Feb 25, 2010 (9:24 am)
My 2007 4-door Sahara started "Death Wobble' at 22,000 miles. The dealer(s) have had it back 5 times! They have replaced the: Tires, shocks, ball joints, steering stabilizer three times, and now the control arms. GUESS what - it did it again yesterday! What makes this horrible is my wife drives this jeep with my kids in it all the time and when it happens you think your dead! We work on jeeps all the time, rock crawlers etc... They need to go to a dual steering stabilizer but they don't make one yet. The engineers in Detroit know about this, the head of Quality Control knows about this and I am getting back with them today to let them know it happened again. I now have 35,000 miles and I have just a little bit of time left to declair it a LEMON!!!! I hate to do it, but they have no solution yet. I am at my wits end!
#164 of 229 RE: Front end shaking [okjeep07]
Feb 25, 2010 (10:45 am)
Traded in our 2007 Wrangler X with about 16k miles on it. Wife, kids and I were all in the Jeep and got the Death Wobble. Dealer put on a "heavier duty" stabilizer/dampner. Not sure if it really resolved the issue. Traded it in on a 2010 Subaru Outback. Haven't regretted it once!