44 messages,
Last post on Jun 08, 2013 at 11:20 AM
You are in the
Chevrolet S-10 & GMC S15 Sonoma Forum.
What is this discussion about?
Chevrolet S-10, GMC Sonoma, Engine, Truck
#38 of 44 Re: 2.5 to a 4.3 swap [ryanator]
by steve1958
May 17, 2011 (8:15 pm)
yes, this will work...
Jun 02, 2011 (3:30 pm)
I would like to know what kind of kit I would need to swap my 91 4.3 to a 350 small block in a 4x4 S10 blazer. Thank you for any advice that you can give me.
#40 of 44 Re: 4.3 to 350 swap [whitetailslam]
by 355s10
Jul 26, 2011 (9:09 am)
check jags that run. they have a full book on everything you will need. depending on if you are goin F/I.... you can easily get a harness from painlesswiring. the do v8 swaps in s10, jags... n a few other vehicles. you will need a flip kit for the radiator (4.3 radiator or vette radiators work) and 2.8 motor mounts from an older s10 will work fine. being a 91 is it TBI or carb??
#41 of 44 S-10 needs a motor
by shack4tom
Dec 20, 2011 (1:01 am)
Ok, I have an S-10 sitting there, its not moving cuz the motor died (RIP). I don't know which way to turn. Crate motor, junk yard motor, factory motor, rebuild the one thats in there or call the tow truck and get a hundred dollars? What should I do? I welcome all comments, maybe someone wants to purchase-I could make a deal. Concord NC. 2000, high miles but looks good, 2.2L automatic, navy blue. But I would rather keep it for my daughter and I to share. A bit sentimetal.
#43 of 44 2000 s10 bad motor?
by buckiejr
Jun 08, 2013 (11:20 am)
#44 of 44 2000 s10 bad motor?
by buckiejr
Jun 08, 2013 (11:20 am)
can i put a 2000 s10 fuel flex vin 5 motor, in my 2000 s10 it has the regular 2.2. VIN 4 are there something you have to change .they both are 2000 s 10 2.2 motors