42 messages,
Last post on Dec 31, 2011 at 4:20 AM
You are in the
Chevrolet S-10 & GMC S15 Sonoma Forum.
What is this discussion about?
Chevrolet S-10, GMC Sonoma, Engine, Truck
#4 of 42 Re: s-10 v8 swap [mvolek]
by dthesman
Jan 13, 2007 (9:58 pm)
you can do lots without having to do any major cutting and fit any small-block nicelly man it's just how u go about it
#5 of 42 2000 Catera
by miklman
Jan 16, 2007 (8:42 am)
Can I put a Northstar v8 into a 2000 Catera w/3.0 V6?
#6 of 42 Re: s-10 v8 swap [hoodlatch]
by mvolek
Jan 17, 2007 (11:39 am)
A 307 will work but is a lil large to be fit in there. I know it sounds weird but there is a difference from a 305 to a 307. But it will work
#7 of 42 2001 s10 zr2 v8 engine swap
by nhs06
Feb 02, 2007 (11:00 pm)
does anybody make a 4.3L to 5.7L engine conversion kit for a 2001 S10 ZR2
#9 of 42 2000 S-10 with 2.2L
by csumner
Feb 06, 2007 (6:26 am)
How hard will it to be to swap a 5.3L or a 5.7L V8 with fuel injection into a 2000 s-10 with a 2.2L with a 5speed manual tranny, if its even pratical?
Feb 06, 2007 (6:00 pm)
1990 chevy s10 2.8 fast idle have changed out idle control motor still has fast idle pleas help
#11 of 42 Re: s-10 v8 swap [mvolek]
by freewheelin72
Feb 06, 2007 (8:59 pm)
a 4.3 v-6 from an Olds Bravada(another Chevy Blazer) . Gm got in some hot water in the late 70's for putting Chevrolet small blocks in Cutlas's (people whining about having an engine with more power and less expensive replacement parts--DUMB) that ended up legalizing using Chevrolet motors in race cars of other GM divisions .
#12 of 42 94 LT-1 350 into 93 S-10 Blazer 4x4 4.3 v-6 AT
by freewheelin72
Feb 06, 2007 (9:07 pm)
Any info about kits , adapters , engine management circuitry will be greatly appreciated .
Thanks ,---Freewheelin'