Last post on Dec 31, 2011 at 4:20 AM
You are in the Chevrolet S-10 & GMC S15 Sonoma
What is this discussion about?
Chevrolet S-10, GMC Sonoma, Engine, Truck
#1 of 42 s-10 v8 swap
Jan 08, 2007 (9:20 am)
I was wondering if a motor out of an oldsmobile will work in an 89 s-10.
#2 of 42 Re: s-10 v8 swap [mvolek]
Jan 13, 2007 (7:09 am)
I've been wondering about the same thing, except with a 307 vice 350. Either way I'm sure things like cutting torch and welders fit into the equation. Actually, my little S-10 has been performing quite well with the 4.3L.
#4 of 42 Re: s-10 v8 swap [mvolek]
Jan 13, 2007 (9:58 pm)
you can do lots without having to do any major cutting and fit any small-block nicelly man it's just how u go about it
#5 of 42 2000 Catera
Jan 16, 2007 (8:42 am)
Can I put a Northstar v8 into a 2000 Catera w/3.0 V6?
#6 of 42 Re: s-10 v8 swap [hoodlatch]
Jan 17, 2007 (11:39 am)
A 307 will work but is a lil large to be fit in there. I know it sounds weird but there is a difference from a 305 to a 307. But it will work
#7 of 42 2001 s10 zr2 v8 engine swap
Feb 02, 2007 (11:00 pm)
does anybody make a 4.3L to 5.7L engine conversion kit for a 2001 S10 ZR2
#9 of 42 2000 S-10 with 2.2L
Feb 06, 2007 (6:26 am)
How hard will it to be to swap a 5.3L or a 5.7L V8 with fuel injection into a 2000 s-10 with a 2.2L with a 5speed manual tranny, if its even pratical?
Feb 06, 2007 (6:00 pm)
1990 chevy s10 2.8 fast idle have changed out idle control motor still has fast idle pleas help