You are here: Forums SUVs Ford Expedition Ford Expedition: Reprogramming the Remote

Ford Expedition: Reprogramming the Remote

10 messages,  Last post on Jan 05, 2009 at 3:52 PM

You are in the Ford Expedition Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Expedition, Ford, Security System, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#6 of 10 Re: Keyless Remote [lhwill] by badcobra Mar 16, 2007 (11:06 am)
Replying to: lhwill (Mar 15, 2007 2:21 pm) Hi, You need to go to your manual and read under "Keyless Entry", then, you enter the code that comes printed on your card when you bought the truck. If you had misfortune like me, I had to remove the right front kick panel and search for the "keyless entry module" that has the code printed right on it. On my 2003 Expedition, that is how it is. On some older FORD vehicles, the code is actually printed on the tailgate on the edge somewhere (only visible if you open the gate". Either way, once you get that "master code", you enter it, and then in your manual, it tells you what key to enter first, following that, you can now enter a new (your own) code. i hope that helps. Google is always helpful too.
#7 of 10 new remote programing problem ford 2005 exp. by smartin3 Feb 20, 2008 (2:51 pm)
the new remote seemed to program ok. the lck and unlck feature started to work but the unlock doesn't disable the alarm so the car won't start. also holding the bottom rt button down three seconds used to activate the remote start now it's not working on any of the remotes. help Martin
#8 of 10 keyless entry by spdk9 Feb 23, 2008 (8:29 pm)
I have a 2001 Ford Expedition with a remote keyless entry that only works when the vehcicle is NOT running. Is there a way to program the keyless entry remote to work hile the vehicle is running.   thank you matt Replies to this message: joel0622 (Jan 05, 2009 3:52 pm)
#9 of 10 Re: keyless entry [spdk9] by joel0622 Jan 05, 2009 (3:52 pm)
Replying to: spdk9 (Feb 23, 2008 8:29 pm) I have a 2001 Ford Expedition with a remote keyless entry that only works when the vehcicle is NOT running. Is there a way to program the keyless entry remote to work hile the vehicle is running. No in 2001 that was the design. I think it may have been as late as 04 or 05 when they made them to work with the car running.

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Ford Expedition Ford Expedition: Reprogramming the Remote