Last post on Dec 27, 2012 at 2:57 AM
You are in the Mazda MPV
What is this discussion about?
Mazda MPV, Electrical, Van
#70 of 73 Re: ignition coils [jipster]
Jul 23, 2011 (8:41 pm)
Glad to hear of the improvement, there might still be hope for Mazda, even if they did make the newest Miata less attractive [almost ugly?], but.... if the OEM coils are still vented - as AutoZone's new after-market coil is, I'll stay away.. Any kind of vent in this application is still asking for touble [mainly in the form of water vapor] in my book. I put in the new IAC valve & we'll see how that goes & I'll be looking for a good local price for Denso O2 sensors... or get 'em from the internet..
#71 of 73 Re: Mazda Engine Light P0455 [hawkeyes2]
Feb 28, 2012 (8:24 pm)
Your P0455 Code is could be from a service bulletin that I located from working on a MPV like yours. The URL is:
This should fix your problem. If not check fuel cap/seal area, or pressurize the evap system and sniff for leaks.
Good luck. I can be reached at dglsdxnyahoo.com
#72 of 73 Re: Mazda Engine Light P0455 [hawkeyes2]
Feb 28, 2012 (8:25 pm)
Hawkeyes2: Your P0455 code could be part of a Mazda recall. The harness is to short going to the purge solenoid connector. Click on this URL to see your problem: http://www.mpvclub.com/tsb.php?id=115
This should take care of your problem.
#73 of 73 Low beams/lights turning off
Dec 27, 2012 (2:57 am)
Just purchased my 2005 MPV about 5 months ago.
Recently the low beam headlights have started turning off, somtimes they wont come on at all and others they will turn off while driving. The high beams work with no problems.
Do any one have any advice on where to start looking for the problem or has anyone had this problem?