You are here:
Forums
Vans & Minivans
Mazda MPV
Mazda MPV Electrical System/Lights

37 messages, Last post on Dec 04, 2009 at 8:32 PM
You are in the Mazda MPV Forum. Your Host is Karens
|
Replying to: angelme (Jan 14, 2007 6:40 pm) Even with no noticeable problems, your engine and emissions equipment may be getting damaged by ignoring the CEL for 2 years. You should get it checked out by a dealer or reputable shop. Don't ignore the CEL, if anything at least find out the code and search the 'net, but don't ignore it for 2 years! -Brian |
|
|
Mazda Millenia 2002 2.5L I went to A zone, he read it was two things, and showed me P 0 455. Spark plug mis fire hole 2, and Emissions leak (Large). I bought a spark plug, and changed it. It was old, and worn out, so I am going to do all 6 now. It is either that or a S Plug Wire. The second part...should I just go to Firestone and ask them to replace all the large hoses that are related to air flow? Or, is it narrowed down to a hose or two and I should just do it myself? What do you think? I have to buy a Hanes for it, or Chiltons...don't have an engine diagram to show where the right hoses are. If you know that is only one or two hoses, and where they are, can you help me? Thank you very much. |
|
I'm little confused about how many parts are connected to the engine light? I have a 2002 mazda mpv and already changed and fixed the sensor, coil, converter, cylinder 2, 3, gasket, and other little parts. The light is on and now we a jolt when the gas paddle is press hard. We also fail the inspection, due to code P0037 (emission problem will be cover by Mazda)but the dealership is said it is the P02404 problem ($1,000 to fix). The frustrating parts is the time and money spend in the dealership. Does anyone know if the engine light misfire is a recall. Is the 2002 model a defect?
|
|
|
Replying to: mazda2 (Sep 24, 2007 8:09 am) http://imazda.com/forums/archive/index.php?t-8035.html |
|
|
Our 2001 mpv had smoke coming from the steering column, followed by the headlights only working on high beam. We took it to the dealership, who told us it would be around $500. They then changed their minds and said the harness is melted and it will be around $3000, and they will be happy to sell us a new vehicle, as we would surely not want to put that much money into our old, paid-for van. Had anybody else had this issue? We had been advised that our insurance might cover this, and after contacting them were told they would cover the repair as well as a rental. They contacted the car rental place and authorized the rental, but have since said they wouldn't cover either one. Does anybody have any advice? Thanks!!
|
|
|
Replying to: aegsm76 (Jan 04, 2008 7:38 am) |
|
|
I have a 1994 MPV. 4WD 3.0 V6 W/Lockers. Two questions: 1) Anyone have an idea why after I turn the MPV off the lights come on about 1 minute later? They stay on for about 30 seconds and then turn off again. Then a couple minutes later on they go again. This continues until the battery dies OR!!! I flip the headlight control into highbeam? Any ideas?? 2) I have what appears to be a factory sticker that says "CODE ALARM" on both front door windows. Is that a stock Mazda alarm system? I bought the MPV used and didn't get any key fobs with it so I'm not even sure if it has keyless entry.
|
|
|
Replying to: 2k3bandit (Apr 17, 2008 8:00 pm) -Brian |
|
You are here:
Forums
Vans & Minivans
Mazda MPV
Mazda MPV Electrical System/Lights
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2006 Mazda MPV



Browse by Board
Browse by Topic
Today's Chats