Sign In Join 



Mazda 626 Starting Issues

31 messages,  Last post on Nov 03, 2009 at 1:53 PM

You are in the Mazda 626 Forum. Your Hosts are pat & karens

What is this discussion about? Mazda 626, Sedan


Messages Page 2 of 4
1
2
3
4
Prev
Next
Last
Go To Msg #
Search This Discussion

#2 of 31
mazda 626 wont do anything by bs24
Jan 04, 2007 (7:32 pm)
Reply
I have a Mazda 626 4 cyl. 1995. It was run off in a ditch and then drove home. After it was shut off it would not start back, the lights inside or outside wont do anything. There is no fire from the fuse box. Anybody know if there is a reset switch or anything that could need pushed?
#3 of 31
why won't my 626 start by rudeboi_1970
Jan 25, 2007 (2:12 pm)
Reply
for starters my car overheated. i then replaced the thermostat, and the radiator. i have purchased a new water pump but haven't had it put on yet. i've tried to start my car and it wouldn't. i bought a new battery and still nothing. only the headlights come on. nothing else electrical works. what could possibly be the problem.
#4 of 31
Re: why won't my 626 start [rudeboi_1970] by pat HOST
Jan 25, 2007 (2:28 pm)
Reply

Replying to: rudeboi_1970 (Jan 25, 2007 2:12 pm)

Hi - welcome. You might want to check our No Start Problems discussion as well. Hope we can help.
#5 of 31
Re: why won't my 626 start [pat] by lexie4
Jan 25, 2007 (4:05 pm)
Reply

Replying to: pat (Jan 25, 2007 2:28 pm)

i had all the same probs are you, i was going nuts turned out my petrol pump had to be replaced my fuel was going through
#6 of 31
mazda alternator belt fell off by canadaturk
Jan 25, 2007 (6:09 pm)
Reply
mazda alternator belt fell offi have mazda 1991 626 regular ,manual
Iwas driving and alternator belt fell off and i replaced it and car doesnt start. Battery is new and alternator just replaced,what could be?.power is ok (sparks are fine , gas is ok)Any ideas Thanks in advance
#7 of 31
Re: mazda alternator belt fell off [canadaturk] by pat HOST
Jan 26, 2007 (4:15 am)
Reply

Replying to: canadaturk (Jan 25, 2007 6:09 pm)

Welcome! Hope someone can help you here. If you don't hear from anyone shortly, try the link I posted in msg 4.
#8 of 31
95 626 no intermitten no fire by superdman1967
Sep 23, 2007 (4:13 pm)
Reply
just got the car ran great.turned it off for work 8 hours later wouldnt fire up.cleaned the cap n rotor still nothing.tryed repetedly and finnally fired up any advice?
#9 of 31
Hit & Miss starts by 99616
Mar 19, 2008 (5:04 pm)
Reply
I've a 99 Mazda 626, 4 cyl. I've taken it to dealorship 3 consecutive times for same problem, 1st time new battery, 2nd time new alternator, 3rd time base line idle was too low, they also checked spark plugs & air intake for leaks. What next, Starter Motor? This morning it started fine, drove 60 miles, stopped for 15 mins and it wouldn't start again! Thanks for your help.
#10 of 31
95 mazda 626 fuel pump relay low side power not working by justfixit
Apr 06, 2008 (8:54 pm)
Reply
working on a 95 4cyl auto mazda 626. Car was given to me and found it was a no start. Used starting fluid and it would started. Performed test and could not hear the fuel pump in the tank. Removed the fuel pump unit and found the pump had seized up and the gas in the tank was really bad ( very bad smell and a red/brown color ) Changed the pump and removed the bad gas from the tank and cleaned out the tank. replaced the fuel filter. Still the car would not start. Could not hear the pump in the tank run til the motor was cranking, but not when the key is first turned on. Checked the fuel pump relay circuit and found no " low side power" to the relay to activate the high side power to the fuel pump. Cant find a wiring diagram to the car, so be having trouble tracking down the problem!! Was hoping someone can give me some ideals on this.... Thanks....Jay
#11 of 31
91 mazda 626gt starting problems by tszabados
Jun 14, 2008 (2:31 pm)
Reply
Have a 91 626 gt that stalled on my daughter and hasn't started since. I have checked for spark, there was none. So I CHANGED THE COIL AND IGNITER BOX
checked for spark there is none.checked all the wiring connections , looked for a fuel cut off switch couldn't find one, checked to see if the distributer reading ok and it seems to be. what else should i be doing?

Messages Page 2 of 4
1
2
3
4
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement