You are here: Forums Pickups Dodge Ram Dodge Ram General Operating Questions

Dodge Ram General Operating Questions

56 messages,  Last post on Nov 17, 2009 at 6:19 AM

You are in the Dodge Ram Forum. Your Host is kcram

What is this discussion about? Dodge RAM 150, Dodge Ram Pickup 2500, Dodge Ram Pickup 1500 SRT-10, Electrical, Truck

Messages Page 4 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

#26 of 56 disengaging front wheels while staying in 4wd low range - 96 ram 2500 by pfteryl1 Apr 21, 2007 (11:55 am)
How can i use 4wd low range for towing my 5th wheel (11000 lbs) up steep grades by disengaging the front wheel drive on dry pavement and curved roads.....WARN does not show any parts for me....'96 Ram, V10, 2500, 4wd. Any suggestions?
#27 of 56 Windshield Wiper Arm Removal by ramhead1 May 25, 2007 (8:08 am)
#28 of 56 Windshield Wiper Arm Removal by ramhead1 May 25, 2007 (8:08 am)
Hi...Does anyone know how to remove the wiper arms on a 98 Dodge Ram...I see a little tab on the arm where it connects, but it does not seem to move...Any help would be appreciated.
#29 of 56 Re: My Problem: Vibrations at 75 MPH [kcram] by sloberg Nov 01, 2007 (12:02 pm)
Replying to: kcram (Aug 21, 2007 2:06 pm) We are driving our first Dodge (2003) as well as first diesel. We have averaged $300/month on repairs mostly u-joints, which causes a vibration. We drive mostly highway, no off road miles. We also had a bent drive shaft which caused a vibration too. Any one else out there having these problems. We really like the truck, just wish we could figure out why the recurring problem. Someone with a 98 Dodge diesel was told his engine is too heavy, threfore the u-joint problems. Anyone else have a similar experience? We would like to get this fixed or we will have to get rid of the truck.
#30 of 56 Stock Truck Height by froderman Nov 09, 2007 (4:44 am)
I have a 2000 Dodge 2500 Diesel. Bought it used from the original owner. He tells me that it does not have a lift kit on it but it seems REALLY high. How does one tell if it has been lifted or not?
#31 of 56 Cab Clearance Lights for 2000 Dodge 2500 by froderman Nov 09, 2007 (6:19 am)
I have a 2000 Dodge 2500. I would like to install (or have installed if it is to difficult) Clearance lights on top of the Cab. Does anyone know if this truck is pre-wired for this type of installation or do I have to run wires all the way back to a central location?
#32 of 56 1985 Dodge Ram 150 by vanessac0510 Nov 11, 2007 (5:42 pm)
Hi, My husband and I have been working on this truck, it was hit on the front fender of the drivers side, the crossbar was hitting the frame so we replaced it. Now it doesn't seem to turn as sharp, actually it wont turn sharp at all to make a turn right to another street I have to get in the opposite lane then back up again to get it going right.It turns left just fine. The left side was the one hit. Does anyone have any input on this? What could be going on?
#33 of 56 tips on getting new seat covers by eatkins Dec 09, 2007 (3:48 am)
hey guys..am looking for a new seat covers for my car...does anyone ve an idea where should i get them ??? Replies to this message: eatkins (Dec 09, 2007 6:26 am)
#34 of 56 Re: tips on getting new seat covers [eatkins] by eatkins Dec 09, 2007 (6:26 am)
Replying to: eatkins (Dec 09, 2007 3:48 am) well after surffing the internet for more that an hour...i found a very nice and well organized website..they ve it all..all the makes with all the models, sub models and the years..anyway..if anyone is looking for a new seat covers for his car... i recommend visiting that site: www.barbari.com
#35 of 56 securty system by jan01 Dec 09, 2007 (6:23 am)
hi all i have a 2003 dodge ram 1500 it has a securty system acording to the window sticker. i already have a keyless remote to un lock the doors .how do you arm the securty system with the remote i already have thanks jan01.

Messages Page 4 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Dodge Ram Dodge Ram General Operating Questions